Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
The LR45 low level lift has a lifting capacity of up to 4500kg.
It is designed to raise all four the wheels from the ground up to maximum height of 800 mm, with a mechanical locking system to prevent the vehicle from lowering prematurely.
It has a total width of 2100mm and is ideal to pick up wider vehicles like the Toyota Quantum’s.
Model: LR45
Product: 4.5 ton low level lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Technical information
Lifting capacity: 4500 kg
Max capacity – front axle: 2273 kg
Max capacity – rear axle: 2273 kg
Lifting height (no blocks): 578 mm
Lifting height (with blocks): 800 mm
Overall pad length: 1346 mm
Overall length: 2094 mm
Overall pad width: 610 mm
Overall width: 2159 mm
Lowered height: 102 mm
Lifting time: 1 35 seconds
Motor: 110/208-230 VAC / 50/60 Hz. 1Ph
The Easy lift is our portable car lift system.
Everything you need to quickly, easily and safely lift your vehicle or electric vehicle for inspection, service and detailing.
Ideal for the home or at the track – for ht weekend enthusiast or seasoned professional. Sets up in minutes, lifts to service height in seconds.
Space saving design – can be hung on a wall, stash out of the way.
The Easy Lift portable lifting system makes vehicle maintenance on and off the track convenient and lightening fast!
It can go anywhere and is easily stowed in the trunk or back seat of most cars. Bring it to the track, or drop it on your garage floor to perform routine maintenance in the comfort of your home all in seconds.
The Easy Lift replaces clumsy floor jacks and unstable jack stands with a safe, durable and convenient vehicle jacking and support system.
Simply position the lightweight jack frames under the vehicle, push the raise button on the hand-held control and in seconds the entire car is about 546mm of the ground ready for tyre changes, chassis tuning or other maintenance.
The ruggedly built frame collapse to a low 91mm profile, so they fit where other jacks don’t.
With Easy Lift, practicality and portability become a reality.
Because the Easy jack is void of any cross-members, it provides total under-car access and can be installed at a width that best suits the vehicle being raised.
Model: TL-5530
Product: 3ton Portable Lift
*Colours and designs may differ
Technical information
Lifting capacity: 3 ton
Individual frame weight: 44 kg
Raised (frame only): 462 mm
Raised (stacked blocks): 546 mm
Collapsed: 91 mm
Lifting point spread: – min 951 mm
Lifting point spread: – max 1676 mm
Frame width: 318 mm
Frame length: 1930mm
Lifting time: 15-30 seconds
Packaging weight 1/3: 51.3 kg
Packaging dimensions 2/3: 2030*395*137 mm
Packaging weight 2/3: 51.3 kg
Packaging dimensions 3/3: 695*335*300 mm
Packaging weight 3/3: 28kg
The XTB1200B is a universal hand spin wheel balancer for car, truck and bus wheels, particularly suitable for mobile service.
The shaft height is adjustable by handle and is even suitable for the heaviest commercial vehicle wheels, without the need for a lift.
The base is fitted with two wheels facilitating the handling and movement of the balancer, making it particularly suitable for mobile service, for example on a racetrack.
Optional extra – motorcycle adapter.
Model: XTB1200B
Product: Battery mode mobile hand spun wheel balancer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical Information:
Rim width for car: 1.5” 12”
Rim width for truck: 3” – 20”
Rim diameter for car: 12” – 26”
Rim diameter for truck: 12” – 30”
Max tyre dia for car: 1000mm
Max tyre dia for truck: 1200mm
Balancing precision for car: ±1g
Balancing precision for truck: ±10g
Packaging dimensions: 1120*1990*970 mm
Packaging weight: 200 kg
A Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top.
Code: SG40DX
Product: 4 Ton manual release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lift
Lifting capacity: 4000kg
Maximum lifting height: 1900mm
Minimum lifting height: 85mm
Overall height: 3605mm
Overall width: 3426mm
Width between columns: 2803mm
Maximum vehicle width: 2576mm
Lifting time: 40s
Lowering time: 60s
Noise level: 70 dB(A0/1m
Average weight of package: 620kg
Electric motor
Voltage: 220V
Power: 2.2 Kw
Speed: 2850rpm
Power unit
Type: Gear
Flow rate: 4.8 cm³/g
Continuous working pressure: 170 bar – 190 bar
Peak pressure: 210 bar
Weights & dimensions
Packaging dimensions 1/3: 2950*520*700 mm
Packaging weight 1/3: 600 kg
Packaging dimensions 2/3: 970*90*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 1780*480*420 mm
Packaging weight 3/3: 64 kg
The BP460b is based on long-established electronic parts.
The machine is primarily designed for automatic balancing of large freight wheels, but by its design and equipment it also serves to balance the wheels of passenger cars because in CAR and VAN settings it works as a 2D personal balancer.
Pleasant work contributes to the pneumatic wheel lift with foot control.
Two balancing modes:
1) passenger car tyres (high precision balance ± 1 g)
2) Truck tyres and other heavy and dimensional tyres (accuracy ± 10 g
Model: BP460b
Product: Truck wheel balancer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information:
Rim diameter: 10” – 24” inch
Max wheel weight: 200 kg
Max wheel diameter: 1200 mm
Rim width: 1.5″ – 20″ inch
Precision: ±1 g (car) / ±10 g (truck)
Motor power: 0.55 kW
Power supply: 220 V
Rotation: 100 rpm (car) / 200 rpm (truck)
Balancing time: 9 s (car) / 20 s (truck)
Second test: <5 g
Machine dimension: 1330*1280*1320 mm
Machine weight: 220 kg
Packaging dimensions: 1300*990*1150 mm
Packaging weight: 270 kg
Low power and energy saving motor to save extra costs.
The perfect machine for small workshops or mobile tyre services. Suitable for passenger car wheels, vans, caravan/trailer wheels, and also motorcycle wheels (optional adapter).
Model: BP3010
Product: Wheel Balancer with Laser
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical Information
Rim diameter: 10” – 24” inch
Max wheel weight: 70 kg
Rim width: 1000 mm
Precision: 1.5” – 20” inch
Motor power: 0.25 kW
Power supply: 220V
Rotation: 200 rpm
Balancing time: 10s.
Second test: <5 g
Machine dimensions: (L*W*H) 1300*1150*1700 mm
Machine weight: 136 kg
Packaging dimensions: 990*760*1145mm
Packaging weight: 164 kg
Wheel Balancing Machine with laser pointer BP75
The BP75 Balancer is equipped with a keyboard and LCD display with graphical display of functions and activities and Italian software with simple controls.
The microprocessor performs all system functions.
The mechanical group of the shaft and the drive motor is arranged in one cushioned unit, thus achieving high precision balancing and minimal maintenance requirements.
Automatic style, automatic measurement of distance and diameter.
Optional accessories allow tyre balancing on discs without center bore and motorcycle wheels.
Model: BP75
Product: Passenger wheel balancer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical Information:
Max wheel weight: 70 kg
Max wheel width: 1188 mm
Rim width: 1.5” – 20” inch
Precision: ±1 g
Motor power: 90 W
Power supply: 100/230V 1 ph
Rotation per minute: 140 rpm
Balancing time: 7 s
Second time mounting test: <5 g
Packaging dimensions: 990*760*1145 mm
Net weight: 130 kg
Gross weight: 168 kg
Small and compact, it is an electronic balancing machine with microprocessor designed for balancing wheels weighting up to 65kg.
The push button controlled calibration system allows a range of adjustment which is also sufficient to cover wheels. Differing from ordinary ones (motorcycles and racing cars).
Special functions are also available to cater for wheels of unusual shape and there is provision for optional functions of the balancing machine.
The operator will enter the 3 specifications of offset, wheel width and wheel diameter before spinning the wheel for the balancing process.
The balancer will then indicate the weight placement required and its value. Simple, compact, affordable and accurate the XTB820 is also ideal for use in a in a compact workshop environment as well as a mobile tyre fitting operation.
Optional extra – motorcycle adapter.
Model: XTB820
Product: Electric operated passenger Wheel balancer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical Information:
Max wheel weight: 65 kg
Voltage: 220V/50Hz
Balancing accuracy: ±1g
Rim diameter: 10” – 24”
Rim width: 1.5” – 20”
Cycle time: 15s
Packaging dimensions: 780*570*1080 mm
Packaging weight: 110 kg
Net weight: 83kg
Machine dimensions: 900*540*995mm
The SD12B has been the choice of motorcycle technicians for over twenty years, why?
Because its the best!
With four precision metal shielded bearings and a level adjustable frame, the Static Wheel Balancer will suit most motorcycle wheels.
Model: SD12B
Product: Static Wheel Balancer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information:
The stand out feature is the standard 10mm Stainless Steel shaft, CNC machined cones, can do up to 23” tyres
The SG4 wheel alignment lift has built in rear slip plates, and comes with an 2.5 ton auxiliary jack and is suitable for long wheelbase Iveco’s.
It has all of the accessories required for the purpose of carrying out wheel alignment.
Code: SG4
Product: 5 ton Alignment lift with slip plates & 2.5 ton aux jack
Suitable for long base Iveco’s
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
You can carry out maintenance work on a 4 post lift, but for some jobs you will need the help of a jacking beam or as they are often referred to rolling jacks.
These are used when you need to lift the wheels off the platform.
They run up and down the center of the 2 platforms and you then position them where you need to lift, such as at the front or rear.
Model: SS700
Product: 4 ton service & parking lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lifting capacity: 4000kg
Max lifting height: 1900mm
Raising/lowering time: Appox 51s
Total height: 2237mm
Total width: 2630mm
Runway length: 4200mm
Max drive-through clearance: 2398mm
Runway width: 474mm
Power supply: 220V
Power: 2.2KW
Net weight: 850kg
Hydraulic pressure: 18MPa
Noise: <70dB(A)
Packaging dimensions: 4300*550*710 mm
Packaging weight: 850 kg
Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top. 3 stage telescopic lifting arms enabling you to lift anything from a small car, a transporter or a camper with a long wheelbase.
Code: SG-55
Product: 5.5 Ton electric release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Perfect for VW Crafters
Technical information
Lifting capacity: 5500 kg
Max lifting height: 1900mm
Min lifting height: 85mm
Power of motor: 3.0Kw
Oil pressure: 18Mpa
Power supply: 220V
Rise time: 50s
Lowering time: 40s
Packaging dimensions 1/3: 2950*570*930 mm
Packaging weight 1/3: 1059 kg
Packaging dimensions 2/3: 970*290*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 550*300*180 mm
Packaging weight 3/3: 7.5 kg
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a
separate isolator.
Robust design, making it a popular choice for automotive maintenance.
Used for lifting vehicles to facilitate maintenance or repair work.
Code: E1531C
Product: 3 Ton short body turbo lift
*Colours and designs may differ
Technical information
Min height: 120 mm
Max height: 453mm
Strokes: 6.5
Net weight: 28 kg
Gross weight: 30 kg
Product size: 685*338*155 mm
Packaging dimensions: 710*385*200 mm
Great for providing easy access to scooters for repair & maintenance tasks, the SD1010ND hand pump operated hydraulic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, the SD1010ND reduces the amount of strain involved with working on scooters, as it allows users to access the vital components of the bike without having to bend down or kneel.
Model: SD1010ND
Product: 250 kg scooter lift
*Colours and designs may differ
Technical information
Capacity: 250 kg
Lift weight: 80 kg
Minimum height: 170 mm
Maximum height: 760 mm
Length: 1800 mm
Width: 560 mm
Packaging dimensions: 1830*580*19 mm
Packaging weight: 180 kg
Setting up of the SD1010ND motorcycle/scooter lift
The Bright CB76NP is a high-precision, computerised wheel balancer designed for South African workshops and tyre centres.
Equipped with a pneumatic locking shaft, this machine ensures fast, accurate balancing for passenger cars, SUVs, and light commercial vehicles, while reducing technician effort and increasing workshop efficiency.
Model: BP76
Product: Passenger wheel balancer with power clamp
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information
Rim diameter: 1 – 28”
Max wheel weight: 70 kg
Max wheel diameter: 1118 mm
Rim width: 1.5 – 20”
Precision: ±1 g
Motor power: 90 W
Power Supply: 220v
Rotation: 140 rpm
Balancing time: 7 s
Second test: ±5 g
The Devi WB‑70a Wheel Balancer is engineered to meet the demands of modern automotive service environments.
Its robust design and advanced features make it a reliable choice for achieving precise wheel balancing.
Whether servicing standard steel rims or premium alloy wheels, the WB‑70a ensures optimal performance and customer satisfaction.
With its wide rim diameter and width range, the WB‑70a is versatile enough to handle a variety of wheel sizes.
The ±1 gram balancing precision guarantees smooth wheel operation, reducing vibrations and
enhancing vehicle handling. The machine’s compatibility with multiple voltage inputs adds to its flexibility, making it suitable for use in different regions.
Designed for ease of use, the WB‑70a features a user-friendly interface that simplifies the balancing process.
Its safety features ensure a secure working environment, protecting both the operator and the equipment.
Model: WB-70a
Product: Economy passenger wheel balancer with laser
*Colours and designs may differ
Technical information
Max wheel weight: 65 kg
Power: 0.25 kw
Power supply: 220 V
Balancing accuracy: ± 1 g
Balancing speed: 20r/min
Cycle time: 8s
Rim diameter: 10 – 26”
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
