The LR45 low level lift has a lifting capacity of up to 4500kg.

It is designed to raise all four the wheels from the ground up to maximum height of 800 mm, with a mechanical locking system to prevent the vehicle from lowering prematurely.

It has a total width of 2100mm and is ideal to pick up wider vehicles like the Toyota Quantum’s.

Model: LR45
Product: 4.5 ton low level lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ

Technical information
Lifting capacity: 4500 kg
Max capacity – front axle: 2273 kg
Max capacity – rear axle: 2273 kg
Lifting height (no blocks): 578 mm
Lifting height (with blocks): 800 mm
Overall pad length: 1346 mm
Overall length: 2094 mm
Overall pad width: 610 mm
Overall width: 2159 mm
Lowered height: 102 mm
Lifting time: 1 35 seconds
Motor: 110/208-230 VAC / 50/60 Hz. 1Ph

The Easy lift is our portable car lift system.

Everything you need to quickly, easily and safely lift your vehicle or electric vehicle for inspection, service and detailing.

Ideal for the home or at the track – for ht weekend enthusiast or seasoned professional. Sets up in minutes, lifts to service height in seconds.

Space saving design – can be hung on a wall, stash out of the way.

The Easy Lift portable lifting system makes vehicle maintenance on and off the track convenient and lightening fast!

It can go anywhere and is easily stowed in the trunk or back seat of most cars. Bring it to the track, or drop it on your garage floor to perform routine maintenance in the comfort of your home all in seconds.

The Easy Lift replaces clumsy floor jacks and unstable jack stands with a safe, durable and convenient vehicle jacking and support system.

Simply position the lightweight jack frames under the vehicle, push the raise button on the hand-held control and in seconds the entire car is about 546mm of the ground ready for tyre changes, chassis tuning or other maintenance.

The ruggedly built frame collapse to a low 91mm profile, so they fit where other jacks don’t.

With Easy Lift, practicality and portability become a reality.

Because the Easy jack is void of any cross-members, it provides total under-car access and can be installed at a width that best suits the vehicle being raised.

Model: TL-5530
Product: 3ton Portable Lift
*Colours and designs may differ

Technical information

Lifting capacity: 3 ton
Individual frame weight: 44 kg
Raised (frame only): 462 mm
Raised (stacked blocks): 546 mm
Collapsed: 91 mm
Lifting point spread: – min 951 mm
Lifting point spread: – max 1676 mm
Frame width: 318 mm
Frame length: 1930mm
Lifting time: 15-30 seconds
Packaging weight 1/3: 51.3 kg
Packaging dimensions 2/3: 2030*395*137 mm
Packaging weight 2/3: 51.3 kg
Packaging dimensions 3/3: 695*335*300 mm
Packaging weight 3/3: 28kg

You can carry out maintenance work on a 4 post lift, but for some jobs you will need the help of a jacking beam or as they are often referred to rolling jacks.

These are used when you need to lift the wheels off the platform.

They run up and down the center of the 2 platforms and you then position them where you need to lift, such as at the front or rear.

Model: SS700
Product: 4 ton service & parking lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ

Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.

Technical information

Lifting capacity: 4000kg
Max lifting height: 1900mm
Raising/lowering time: Appox 51s
Total height: 2237mm
Total width: 2630mm
Runway length: 4200mm
Max drive-through clearance: 2398mm
Runway width: 474mm
Power supply: 220V
Power: 2.2KW
Net weight: 850kg
Hydraulic pressure: 18MPa
Noise: <70dB(A)
Packaging dimensions: 4300*550*710 mm
Packaging weight: 850 kg