Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
The LR45 low level lift has a lifting capacity of up to 4500kg.
It is designed to raise all four the wheels from the ground up to maximum height of 800 mm, with a mechanical locking system to prevent the vehicle from lowering prematurely.
It has a total width of 2100mm and is ideal to pick up wider vehicles like the Toyota Quantum’s.
Model: LR45
Product: 4.5 ton low level lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Technical information
Lifting capacity: 4500 kg
Max capacity – front axle: 2273 kg
Max capacity – rear axle: 2273 kg
Lifting height (no blocks): 578 mm
Lifting height (with blocks): 800 mm
Overall pad length: 1346 mm
Overall length: 2094 mm
Overall pad width: 610 mm
Overall width: 2159 mm
Lowered height: 102 mm
Lifting time: 1 35 seconds
Motor: 110/208-230 VAC / 50/60 Hz. 1Ph
The Easy lift is our portable car lift system.
Everything you need to quickly, easily and safely lift your vehicle or electric vehicle for inspection, service and detailing.
Ideal for the home or at the track – for ht weekend enthusiast or seasoned professional. Sets up in minutes, lifts to service height in seconds.
Space saving design – can be hung on a wall, stash out of the way.
The Easy Lift portable lifting system makes vehicle maintenance on and off the track convenient and lightening fast!
It can go anywhere and is easily stowed in the trunk or back seat of most cars. Bring it to the track, or drop it on your garage floor to perform routine maintenance in the comfort of your home all in seconds.
The Easy Lift replaces clumsy floor jacks and unstable jack stands with a safe, durable and convenient vehicle jacking and support system.
Simply position the lightweight jack frames under the vehicle, push the raise button on the hand-held control and in seconds the entire car is about 546mm of the ground ready for tyre changes, chassis tuning or other maintenance.
The ruggedly built frame collapse to a low 91mm profile, so they fit where other jacks don’t.
With Easy Lift, practicality and portability become a reality.
Because the Easy jack is void of any cross-members, it provides total under-car access and can be installed at a width that best suits the vehicle being raised.
Model: TL-5530
Product: 3ton Portable Lift
*Colours and designs may differ
Technical information
Lifting capacity: 3 ton
Individual frame weight: 44 kg
Raised (frame only): 462 mm
Raised (stacked blocks): 546 mm
Collapsed: 91 mm
Lifting point spread: – min 951 mm
Lifting point spread: – max 1676 mm
Frame width: 318 mm
Frame length: 1930mm
Lifting time: 15-30 seconds
Packaging weight 1/3: 51.3 kg
Packaging dimensions 2/3: 2030*395*137 mm
Packaging weight 2/3: 51.3 kg
Packaging dimensions 3/3: 695*335*300 mm
Packaging weight 3/3: 28kg
A Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top.
Code: SG40DX
Product: 4 Ton manual release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lift
Lifting capacity: 4000kg
Maximum lifting height: 1900mm
Minimum lifting height: 85mm
Overall height: 3605mm
Overall width: 3426mm
Width between columns: 2803mm
Maximum vehicle width: 2576mm
Lifting time: 40s
Lowering time: 60s
Noise level: 70 dB(A0/1m
Average weight of package: 620kg
Electric motor
Voltage: 220V
Power: 2.2 Kw
Speed: 2850rpm
Power unit
Type: Gear
Flow rate: 4.8 cm³/g
Continuous working pressure: 170 bar – 190 bar
Peak pressure: 210 bar
Weights & dimensions
Packaging dimensions 1/3: 2950*520*700 mm
Packaging weight 1/3: 600 kg
Packaging dimensions 2/3: 970*90*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 1780*480*420 mm
Packaging weight 3/3: 64 kg
The IMRP is used to correct defected rims/mags.
It corrects and levels the rims and makes the surface smooth using the lathe.
The lathe unit is designed to clean crusty sections of the repaired rim surface.
Model: IMRP
Product: Rim repair with lathe and polisher
*Colours and designs may differ
Technicial Information:
Maximum Rim Diameter: 10” – 24”
Max Rim Width: 12”
Hydraulic Motor Power: 0.75 kW, 220v, 50Hz
Spindle motor: 1.5 kW, 380v, 50Hz
Operating pressure: 0-200 bar (Standard 155)
Sound Intensity: 70 dBA
Packaging dimensions: 1230*780*1420 mm
Packaging weight: 410 kg
The SG4 wheel alignment lift has built in rear slip plates, and comes with an 2.5 ton auxiliary jack and is suitable for long wheelbase Iveco’s.
It has all of the accessories required for the purpose of carrying out wheel alignment.
Code: SG4
Product: 5 ton Alignment lift with slip plates & 2.5 ton aux jack
Suitable for long base Iveco’s
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
You can carry out maintenance work on a 4 post lift, but for some jobs you will need the help of a jacking beam or as they are often referred to rolling jacks.
These are used when you need to lift the wheels off the platform.
They run up and down the center of the 2 platforms and you then position them where you need to lift, such as at the front or rear.
Model: SS700
Product: 4 ton service & parking lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lifting capacity: 4000kg
Max lifting height: 1900mm
Raising/lowering time: Appox 51s
Total height: 2237mm
Total width: 2630mm
Runway length: 4200mm
Max drive-through clearance: 2398mm
Runway width: 474mm
Power supply: 220V
Power: 2.2KW
Net weight: 850kg
Hydraulic pressure: 18MPa
Noise: <70dB(A)
Packaging dimensions: 4300*550*710 mm
Packaging weight: 850 kg
Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top. 3 stage telescopic lifting arms enabling you to lift anything from a small car, a transporter or a camper with a long wheelbase.
Code: SG-55
Product: 5.5 Ton electric release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Perfect for VW Crafters
Technical information
Lifting capacity: 5500 kg
Max lifting height: 1900mm
Min lifting height: 85mm
Power of motor: 3.0Kw
Oil pressure: 18Mpa
Power supply: 220V
Rise time: 50s
Lowering time: 40s
Packaging dimensions 1/3: 2950*570*930 mm
Packaging weight 1/3: 1059 kg
Packaging dimensions 2/3: 970*290*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 550*300*180 mm
Packaging weight 3/3: 7.5 kg
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a
separate isolator.
The ultimate solution for wheel repairs and balancing
IMRP– Rim Repair Machine with Swing Lathe
The IMRP is used to correct defected rims/mags.
It corrects and levels the rims and makes the surface smooth using the lathe.
The lathe unit is designed to clean crusty sections of the repaired rim surface.
XTB820 – Hand spun passenger wheel balancer
The XTB820 wheel balancer is the perfect companion to the XTC428B tyre changing machine. Small and compact, it is an electronic balancing machine with microprocessor designed for balancing wheels weighting up to 65kg.
The push button controlled calibration system allows a range of adjustment which is also sufficient to cover wheels. Differing from ordinary ones (motorcycles and racing cars).
Special functions are also available to cater for wheels of unusual shape and there is provision for optional functions of the balancing machine.
The operator will enter the 3 specifications of offset, wheel width and wheel diameter before spinning the wheel for the balancing process.
The balancer will then indicate the weight placement required and its value. Simple, compact, affordable and accurate the XTB820 is also ideal for use in a in a compact workshop environment as well as a mobile tyre fitting operation.
Robust design, making it a popular choice for automotive maintenance.
Used for lifting vehicles to facilitate maintenance or repair work.
Code: E1531C
Product: 3 Ton short body turbo lift
*Colours and designs may differ
Technical information
Min height: 120 mm
Max height: 453mm
Strokes: 6.5
Net weight: 28 kg
Gross weight: 30 kg
Product size: 685*338*155 mm
Packaging dimensions: 710*385*200 mm
The wheel dolly has a compact hydraulic unit that ensures precise positioning.
Shock absorbing casters ensure a smooth ride from and to the hub on a rough surface. Easiest way to mount & demount truck tyres.
Simply slide the rollers underneath the tyre and use the jack handle to raise it to the desired height.
Model: Y471106
Product: 20 Ton air-hydraulic bottle jack
Technical information
Weight: 25kg
Capacity: 150kg
Frame width: 680mm
Frame depth: 470mm
Frame height: 280mm
Finally there’s a product that really does the job !
This long life, light weight, high capacity cart allows the tyre fitter to maneuverer heavy wheel sets in the most ergonomic way with the help of its
patented tilting system.
The cart has been developed in partnership with some of Europe’s leading tyre
service chains.
It comes in stainless steel (robotic welding) with high strength components.
With just 17kg this lightweight cart handles wheels from 13’’ – 20’’ up to 200kg.
Model: Y471147
Product: Tyre cart
Technical information
Weight: 25kg
Capacity: 150kg
Frame width: 680mm
Frame depth: 470mm
Frame height: 280mm
Scissor stands are suitable for either on a motorcycle lift or on the floor.
Fitted with ball bearing rollers for smooth lifting and lowering. Raise by hand or with a sliding T-bar.
Comes with non-slip rubber for added security.
Great for providing easy access to motorcycles for repair & maintenance tasks, the foot pedal operated pneumatic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, it reduces the amount of strain involved with working on motorcycles, as it allows users to access the vital components of the bike without having to bend down or kneel.
Great for providing easy access to scooters for repair & maintenance tasks, the SD1010ND hand pump operated hydraulic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, the SD1010ND reduces the amount of strain involved with working on scooters, as it allows users to access the vital components of the bike without having to bend down or kneel.
Model: SD1010ND
Product: 250 kg scooter lift
*Colours and designs may differ
Technical information
Capacity: 250 kg
Lift weight: 80 kg
Minimum height: 170 mm
Maximum height: 760 mm
Length: 1800 mm
Width: 560 mm
Packaging dimensions: 1830*580*19 mm
Packaging weight: 180 kg
Setting up of the SD1010ND motorcycle/scooter lift
The Handijack HM4011 is a heavy-duty 300 kg manual hydraulic lifting table cart designed for workshop, warehouse, and industrial environments where efficient material handling and ergonomic lifting are essential.
Built with a robust steel scissor frame and a reliable foot-pump hydraulic system, the HM4011 allows users to lift, position, and transport heavy loads up to 300 kg with minimal physical effort.
The smooth-rolling castors and ergonomic handle enable easy manoeuvrability across factory floors, while the precision hydraulic pump ensures smooth, stable vertical movement.
This versatile lifting table is ideal for assembly tasks, loading/unloading, positioning workpieces at comfortable heights, and reducing strain from repetitive lifting tasks.
Handijack products are manufactured by an established equipment provider with over 25 years of experience in professional material-handling tools.
Model: HM4011
Product: 300kg lifting table cart
*Colours and designs may differ
Technical information
Min height: 350 mm
Max height: 1285 mm
Table size: 820*520 mm
Net weight: 95 kg
Packaging size: 910*560*390 mm
The 2.5-ton pallet jack is a reliable and durable material handling tool designed for warehouses, factories, and retail environments.
Built for efficiency, this manual hydraulic pallet jack allows for easy lifting and maneuvering of pallets up to 2,500 kg (2.5 tons).
Model: SBA-685
Product: 2.5ton pallet jack
Technical information
Load capacity: 2500 kg
Distance between fork arms: 550 mm
Fork length: 1150 mm
Fork lowered height: 75 mm
Steering wheel diameter: Ø 180 mm
Fork wheel diameter: Ø 74 mm
Winntec Combo
R4,945.00Winntec 3 ton low-profile turbo-lift trolley jack supplied together with a set of 3 ton ratchet trestle jack stands — everything a bay needs to lift a vehicle and hold it safely. Both items brand-new, price includes VAT.
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
