Need help? Call us: +27 63 385 8305 or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
My Account
Hello, Sign inR0.00
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
BP887N Fully Automatic Tilt Back Tyre Changer
The BP887 fully-automatic tyre changer is suitable for handling 13”-26” wheels.
It can mount and demount tyres from passenger to LDV vehicles.
It is especially suitable for wide tyres and can be equipped with an optional helper arm. Designed and Engineered in Europe.
Model: BP887N
Product: Passenger Tyre Changer
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information:
Outside clamping range: 11” – 24” inch
Inside clamping range: 13” – 26” inch
Rim width: 3” – 14” inch
Max wheel diameter: 1100 mm
Working pressure: 8 – 10 bar
Bead breaker force: 2800 kg
Power supply: 220V
Motor power: 0.75kW/1.1kW
Rotation per minute: 6.5/13rpm
Noise: <70 dB
Machine dimensions: 1900*1400*2050 mm
Packing dimensions: 1150*920*1000 mm
Machine weight: 325 kg
Packaging weight: 285 kg
The LR45 low level lift has a lifting capacity of up to 4500kg.
It is designed to raise all four the wheels from the ground up to maximum height of 800 mm, with a mechanical locking system to prevent the vehicle from lowering prematurely.
It has a total width of 2100mm and is ideal to pick up wider vehicles like the Toyota Quantum’s.
Model: LR45
Product: 4.5 ton low level lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Technical information
Lifting capacity: 4500 kg
Max capacity – front axle: 2273 kg
Max capacity – rear axle: 2273 kg
Lifting height (no blocks): 578 mm
Lifting height (with blocks): 800 mm
Overall pad length: 1346 mm
Overall length: 2094 mm
Overall pad width: 610 mm
Overall width: 2159 mm
Lowered height: 102 mm
Lifting time: 1 35 seconds
Motor: 110/208-230 VAC / 50/60 Hz. 1Ph
The K1800 aligner can be used on a pit or lift system.
A wheel alignment machine is used to adjust a vehicle’s tracking.
The system connects a vehicle to its wheels.
It is not an adjustment of the tyres or wheels themselves.
The key to proper alignment is adjusting the angles of the tyres which affects how they make contact with the road.
Model: K1800
Product: 3D alignment machine (pit or lift – Fixed camera boom)
*Colours and designs may differ
Important notice!
• Aligner must be installed indoors.
• Approved installers must be used when installing aligners or warranty will be void.
• UPS required.
Technical information
Camber: ±45° ±0.01°
Caster: ±40° ±0.01°
S.A.I.: ±40° ±0.01°
Toe: ±30° ±0.01°
Chassis parameters: <4000mm ±1mm
Equipment specification
Operating temperature: -30°C – 50°C
Power voltage: 220V
Wheel size: 279.4 – 609.6mm
Tyre diameter: No limit
Power requirements: 120v/230v 1PH 50/60Hz
Profile of wheel adapter: 11 – 24”
Rolling compensation style: Forward-backward or backward-forward
Camera resolution: 1.3M
Suggested distance: 2300mm
Short bay distance: 1500mm
Distance between two cameras: 2400mm
Minimum width of vehicle: 1500mm
Maximum width of vehicle: 2400mm
Packaging dimensions: 1/2 1340*830*810* mm
Packaging weight: 1/2 170 kg
Packaging dimensions: 2/2 270*390*2820 mm
Packaging weight: 2/2 70 kg
OTCL400 On-car Brake Disc skimmer
This machine can be attached directly on a vehicles for resurfacing.
The existing model is upgraded and remodeled from customer-oriented perspectives to enable easier and safer car brake disc resurfacing.
Resurfacing particularly improves the performance of brake disc and shortens the braking distance to guarantee safer operation.
Model: OTCL400
Product: On-car Brake disc skimmer
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
High-quality machine designed with garages and small tyre centers in mind.
This semi automatic tyre changer with swing arm and helper arm is a medium duty, air-electric tyre changer for car and light commercial wheels with 11” – 26” rim diameter and will assist with difficult tyres.
High quality mounting and de-mounting head equipped with protectors to safeguard wheels.
Water trap & oil lubricator. Stainless steal bead breaking cylinder.
Model: BP890S
Product: Passenger semi auto swing arm tyre changer with helper arm
**European Designed & Engineered in Italy
Technical information
Outside clamping range: 11” – 24” inch
Inside clamping range: 13” – 26” inch
Rim width: 3” – 13” inch
Max wheel diameter: 1250 mm
Working pressure: 8 – 10 bar
Bead breaker force: 2500 kg
Power supply: 220V
Motor power: 0.75kW/1.1kW
Rotation per minute: 6.5 rpm
Noise: <70 dB
Machine dimensions: 1350*1300*1960 mm
Packing dimensions: 1150*920*1050 mm
Net weight: 239 kg
Gross weight: 269 kg
The SD-18 is a durable, manual motorcycle tyre changer designed for workshops, small
garages, and riders who prefer doing their own tyre changes. With no air or electricity required, it’s portable, reliable, and easy to use.
Model: SD18
Product: Manual Motorcycle tyre changer
*Colours and designs may differ
Technical information
Tyre range: 8” – 22”
Machine weight: 35kg
Power: Fully manual – no air or electricity needed
The Easy lift is our portable car lift system.
Everything you need to quickly, easily and safely lift your vehicle or electric vehicle for inspection, service and detailing.
Ideal for the home or at the track – for ht weekend enthusiast or seasoned professional. Sets up in minutes, lifts to service height in seconds.
Space saving design – can be hung on a wall, stash out of the way.
The Easy Lift portable lifting system makes vehicle maintenance on and off the track convenient and lightening fast!
It can go anywhere and is easily stowed in the trunk or back seat of most cars. Bring it to the track, or drop it on your garage floor to perform routine maintenance in the comfort of your home all in seconds.
The Easy Lift replaces clumsy floor jacks and unstable jack stands with a safe, durable and convenient vehicle jacking and support system.
Simply position the lightweight jack frames under the vehicle, push the raise button on the hand-held control and in seconds the entire car is about 546mm of the ground ready for tyre changes, chassis tuning or other maintenance.
The ruggedly built frame collapse to a low 91mm profile, so they fit where other jacks don’t.
With Easy Lift, practicality and portability become a reality.
Because the Easy jack is void of any cross-members, it provides total under-car access and can be installed at a width that best suits the vehicle being raised.
Model: TL-5530
Product: 3ton Portable Lift
*Colours and designs may differ
Technical information
Lifting capacity: 3 ton
Individual frame weight: 44 kg
Raised (frame only): 462 mm
Raised (stacked blocks): 546 mm
Collapsed: 91 mm
Lifting point spread: – min 951 mm
Lifting point spread: – max 1676 mm
Frame width: 318 mm
Frame length: 1930mm
Lifting time: 15-30 seconds
Packaging weight 1/3: 51.3 kg
Packaging dimensions 2/3: 2030*395*137 mm
Packaging weight 2/3: 51.3 kg
Packaging dimensions 3/3: 695*335*300 mm
Packaging weight 3/3: 28kg
A Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top.
Code: SG40DX
Product: 4 Ton manual release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lift
Lifting capacity: 4000kg
Maximum lifting height: 1900mm
Minimum lifting height: 85mm
Overall height: 3605mm
Overall width: 3426mm
Width between columns: 2803mm
Maximum vehicle width: 2576mm
Lifting time: 40s
Lowering time: 60s
Noise level: 70 dB(A0/1m
Average weight of package: 620kg
Electric motor
Voltage: 220V
Power: 2.2 Kw
Speed: 2850rpm
Power unit
Type: Gear
Flow rate: 4.8 cm³/g
Continuous working pressure: 170 bar – 190 bar
Peak pressure: 210 bar
Weights & dimensions
Packaging dimensions 1/3: 2950*520*700 mm
Packaging weight 1/3: 600 kg
Packaging dimensions 2/3: 970*90*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 1780*480*420 mm
Packaging weight 3/3: 64 kg
Offering you the advantages of cost effective and efficient maintenance for a wide range of vehicle sizes, and also making it a valuable tool for service centers and mechanics servicing diverse vehicle fleets.
Model: ESW450
Product: Off car – Truck & Passenger brake lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Disc biggest diameter: 500mm
Disc biggest thickness: 40mm
Disc precision: ≤0.01mm
Desk height: 1200mm
Motor: 110v/220v 50/60Hz
Reduction motor power: 400w
Spindle revolution: 0-200RPM
Working temperature: -20ºC – 40ºC
Weight: 138kgFeatures and Benefits
The ideal machine for a small workshop or service station.
The BP810 is a semiautomatic tyre machine equipped with a sideways rotating mounting arm, allowing the machine to be placed in small spaces.
The machine is robust and suitable for standard wheels from 10”to 23”inches.
This powerful tyre changer handles everything from simple standard steel wheels to large delicate custom alloy wheels. T
he control pedals have a stop-move function that can stop the chuck jaws at any position to easily tighten the rim. It can also be equipped with a motorcycle adapter kit for the mounting/demounting or motorcycle tyres.
Model: BP810
Product: Passenger semi auto swing arm tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
Helper arm to assist in mounting low profile or run flat tyres, reduces fatigue and allows the operator to work very efficiently with minimal effort.
Helper arm for BP887n
Designed and Engineered in Europe.
Model: AL320
Product: Helper arm for tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
The Bright BP590D tyre changer is used to mount and demount truck, agriculture and industrial tyres.
The tool head rotates 360 degrees and is equipped with a tool arm with automatic tilt back function.
It is equipped with a hydraulic driven carriage allowing the tyre to move on the tyre changer without using manual labor.
The small and portable console is very convenient to observe from different angles during operation.
Model: BP590D
Product: Truck tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information
Rim diameter: 14” – 46” inch
Rim range with extension: 46” – 56” inch
Rim width: 1100 mm
Max wheel diameter: 2200 mm
Hydraulic power: 130 – 150 bar
Hydraulic station motor power: 1.5kW / 380V
Main shaft motor power: 2.4kW / 380V
Noise: <75dB
Machine dimensions: 2500*1800*2100 mm
Packaging dimensions: 2280*2070*1070 mm
Machine weight: 891 kg
Packaging weight: 1152kg
Leverless tyre changers revolutionize the tyre-changing process with innovative technology that eliminates the need for manual tools like tyre irons.
They efficiently demount and mount tyres onto rims, safeguarding both tyre and wheel from damage.
Featuring user-friendly interfaces and versatile capabilities, leverless tyre changers enhance productivity, ensure safety, and offer long-term cost savings for automotive service centers.
Model: BP8650
Product: Leverless tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information
Outside clamping range: 13” – 30”
Rim width: 15”
Max wheel diameter: 47”
Working pressure: 8 -10 bar
Bead breaking force: 9800 N
Voltage: 200 V – 240 V
Motor power: 0.85 Kw
Rotation per minute: 0 – 13 Rpm
Torque: 1200 N
Noise: < 70 dB
Better known as the Fastest Brake lathe in the world. C9372 is capable of faster, more accurate and easier resurfacing.
Infinitely adjustable feed rates allow you to easily modify cut drums.
Variable speeds to allow cutting of the rotor.
Product: Brake disc/drum lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Rotor/disc diameter: 4 – 20” (102mm – 508mm)
Max Rotor/disc thickness: 2.85” (73mm)
Drum diameter: 6” – 19.5” (152mm – 500mm)
Drum depth: 6.5” (165mm)
Flywheel diameter: 6” – 24” (152mm – 610mm)
Spindle weight capacity: 150lbs (68kg)
Spindle speed: 70 – 320RPM
Feed rates – rotor & drum: 0” – 0.026” (0mm – 0.66mm)
Feed rate per minute: 2.54” (64.5mm)
Motor: 110V/220V 50/60Hz
Packaging dimensions: 1130*1030*1300mm
Weight: 300kg
Machine dimensions: 1100*730*720mm
The T8470 brake/disc drum lathe is a versatile, high-precision machine designed to enhance the safety and performance of vehicle braking systems through effective resurfacing of brake drums and discs.
Model: T8470
Product: Off car brake disc/drum lathe (Passenger & truck) *Colours and designs may differ
Technical information
Diameter of brake drum: 200 – 700 mm
Diameter of brake disc: <= 550 mm
Rotating speed: 30/54/80 r/min
Max travel of tool: 300 mm
Feed rate: 0.16 mm/r
Motor power: 1.5 kw
Packing dimensions: 100*905*1172 mm
Gross weight: 600 kg
The BP8630 Swing Arm Tyre Changer with Helper Arm is a versatile, heavy-duty machine designed for handling a wide range of tyre sizes.
Its swing arm design allows for easy positioning of the mounting head, and the integrated helper arm assists with the installation and removal of low-profile and run-flat tyres.
This tyre changer is equipped with a robust clamping system and features a user-friendly control panel, making it ideal for professional workshops.
It enhances efficiency and reduces the risk of tyre damage during mounting and demounting.
Model: BP8630
Product: Swing arm tyre changer with helper arm
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information:
Inside clamping range: 12” – 28”
Outside clamping range: 14” – 30”
Rim width: 15” (380mm)
Max Wheel diameter: 49” (1250mm)
Working pressure: 8 – 10 bar
Rated torque: 1200N.m
Power supply: 220V
Motor power: 0.85KW
Rotation per minute: 0 – 13 rpm


Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000















