Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
The 15T Workshop press has a variety of uses, ideal for removing and installing bushes, ball joints, bearings, gears, pulleys etc.
It also has the added feature of a sliding head simply loosen the clamping plate bolts and the head of the press can be moved to the side allowing for those offset pressing jobs.
The 15 tonne hydraulic ram and pump unit are also easily removed for use on other pressing jobs outside your workshop such as straightening or bending.
The press is supplied with a pressure gauge, two heavy duty pressing plates and is constructed from industrial grade C channel making it ideal for mechanics or the
serious home workshop.
Model: HJ0822
Product: 15 Ton hydraulic press with gauge
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information
Capacity: 15 ton
Working range: 173 – 985 mm
Stroke: 160 mm
Bed width: 500 mm
Side stroke: 169 mm
Weight: 91 kg
Packing dimensions: 1660*665*270 mm
The LR45 low level lift has a lifting capacity of up to 4500kg.
It is designed to raise all four the wheels from the ground up to maximum height of 800 mm, with a mechanical locking system to prevent the vehicle from lowering prematurely.
It has a total width of 2100mm and is ideal to pick up wider vehicles like the Toyota Quantum’s.
Model: LR45
Product: 4.5 ton low level lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Technical information
Lifting capacity: 4500 kg
Max capacity – front axle: 2273 kg
Max capacity – rear axle: 2273 kg
Lifting height (no blocks): 578 mm
Lifting height (with blocks): 800 mm
Overall pad length: 1346 mm
Overall length: 2094 mm
Overall pad width: 610 mm
Overall width: 2159 mm
Lowered height: 102 mm
Lifting time: 1 35 seconds
Motor: 110/208-230 VAC / 50/60 Hz. 1Ph
Hydraulic Shop Press are designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding is required.
Our 50 ton hydraulic workshop press can be operated by hand as well as by foot.
This garage press has a movable cylinder and the height of the work table is easy to adjust with a winch.
Model: YSD0811CE
Product: 50 Ton air hydraulic foot operated workshop press
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information
Ram stroke: 200mm
Side stroke: 245mm
Working range: 67 – 1047mm
Bed width: 730mm
Air pressure: 0.75 – 0.85 Mpa
Air inlet: ¼: NPT
Net weight: 302.4kg
Gross weight: 345kg
Packaging dimensions: 960*350*2010mm
This type of bench press is used in workshops and manufacturing settings for tasks that require applying a significant amount of force, such as bending, pressing, and straightening materials.
The gauge allows users to monitor the applied pressure, ensuring precision and safety during operations.
Model: HJ0802E
Product: 10 ton bench press with gauge
*Colours and designs may differ
Technical information
Capacity: 10 ton
Stroke: 175 mm
Working range: 110 – 364 mm
Bed width: 336 mm
The Easy lift is our portable car lift system.
Everything you need to quickly, easily and safely lift your vehicle or electric vehicle for inspection, service and detailing.
Ideal for the home or at the track – for ht weekend enthusiast or seasoned professional. Sets up in minutes, lifts to service height in seconds.
Space saving design – can be hung on a wall, stash out of the way.
The Easy Lift portable lifting system makes vehicle maintenance on and off the track convenient and lightening fast!
It can go anywhere and is easily stowed in the trunk or back seat of most cars. Bring it to the track, or drop it on your garage floor to perform routine maintenance in the comfort of your home all in seconds.
The Easy Lift replaces clumsy floor jacks and unstable jack stands with a safe, durable and convenient vehicle jacking and support system.
Simply position the lightweight jack frames under the vehicle, push the raise button on the hand-held control and in seconds the entire car is about 546mm of the ground ready for tyre changes, chassis tuning or other maintenance.
The ruggedly built frame collapse to a low 91mm profile, so they fit where other jacks don’t.
With Easy Lift, practicality and portability become a reality.
Because the Easy jack is void of any cross-members, it provides total under-car access and can be installed at a width that best suits the vehicle being raised.
Model: TL-5530
Product: 3ton Portable Lift
*Colours and designs may differ
Technical information
Lifting capacity: 3 ton
Individual frame weight: 44 kg
Raised (frame only): 462 mm
Raised (stacked blocks): 546 mm
Collapsed: 91 mm
Lifting point spread: – min 951 mm
Lifting point spread: – max 1676 mm
Frame width: 318 mm
Frame length: 1930mm
Lifting time: 15-30 seconds
Packaging weight 1/3: 51.3 kg
Packaging dimensions 2/3: 2030*395*137 mm
Packaging weight 2/3: 51.3 kg
Packaging dimensions 3/3: 695*335*300 mm
Packaging weight 3/3: 28kg
A Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top.
Code: SG40DX
Product: 4 Ton manual release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lift
Lifting capacity: 4000kg
Maximum lifting height: 1900mm
Minimum lifting height: 85mm
Overall height: 3605mm
Overall width: 3426mm
Width between columns: 2803mm
Maximum vehicle width: 2576mm
Lifting time: 40s
Lowering time: 60s
Noise level: 70 dB(A0/1m
Average weight of package: 620kg
Electric motor
Voltage: 220V
Power: 2.2 Kw
Speed: 2850rpm
Power unit
Type: Gear
Flow rate: 4.8 cm³/g
Continuous working pressure: 170 bar – 190 bar
Peak pressure: 210 bar
Weights & dimensions
Packaging dimensions 1/3: 2950*520*700 mm
Packaging weight 1/3: 600 kg
Packaging dimensions 2/3: 970*90*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 1780*480*420 mm
Packaging weight 3/3: 64 kg
A 1/2-inch impact wrench is a valuable tool for professionals and DIY enthusiasts alike due to its balance of power, versatility, and ease of use.
It is commonly used in automotive repair, construction, and general maintenance tasks.
Model: T117B
Product: ½” Impact wrench (max torque 520 N.m)
*Colours and designs may differ
Technical information
Square drive: ½”
Max torque: 350 ft.lb
Working pressure: 90 psi / 6.3 bar
Exhaust: Handle
Overall length: 120mm
Air inlet: ¼ “
Packaging dimensions: 190*19*70 mm
Packaging weight: 1.8 kg
The 98806P can be used to loosen bolts of truck and bus tyres.
Powerful tool used for heavy-duty fastening and loosening of large nuts, bolts, and other fasteners.
This tool is employed in industrial, automotive, construction, and manufacturing settings where significant torque is required.
Model: 98806P
Product: 1” Impact wrench
*Colours and designs may differ
Technical information
Hammer mechanism: Pin-less hammer
Square drive: 1”
Anvil length: 220mm
Free speed: 3200 R.P.M.
Bolt capacity: 42mm
Max torque: 3200N.M
Moment bound: 1500-3500N.M.
Air pressure: 5-8kg/cm2
Exhaust type: Side exhaust
Air inlet: ½”
Packaging dimensions: 710*280*190 mm
Packaging weight: 18 kg
The SG4 wheel alignment lift has built in rear slip plates, and comes with an 2.5 ton auxiliary jack and is suitable for long wheelbase Iveco’s.
It has all of the accessories required for the purpose of carrying out wheel alignment.
Code: SG4
Product: 5 ton Alignment lift with slip plates & 2.5 ton aux jack
Suitable for long base Iveco’s
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
You can carry out maintenance work on a 4 post lift, but for some jobs you will need the help of a jacking beam or as they are often referred to rolling jacks.
These are used when you need to lift the wheels off the platform.
They run up and down the center of the 2 platforms and you then position them where you need to lift, such as at the front or rear.
Model: SS700
Product: 4 ton service & parking lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lifting capacity: 4000kg
Max lifting height: 1900mm
Raising/lowering time: Appox 51s
Total height: 2237mm
Total width: 2630mm
Runway length: 4200mm
Max drive-through clearance: 2398mm
Runway width: 474mm
Power supply: 220V
Power: 2.2KW
Net weight: 850kg
Hydraulic pressure: 18MPa
Noise: <70dB(A)
Packaging dimensions: 4300*550*710 mm
Packaging weight: 850 kg
Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top. 3 stage telescopic lifting arms enabling you to lift anything from a small car, a transporter or a camper with a long wheelbase.
Code: SG-55
Product: 5.5 Ton electric release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Perfect for VW Crafters
Technical information
Lifting capacity: 5500 kg
Max lifting height: 1900mm
Min lifting height: 85mm
Power of motor: 3.0Kw
Oil pressure: 18Mpa
Power supply: 220V
Rise time: 50s
Lowering time: 40s
Packaging dimensions 1/3: 2950*570*930 mm
Packaging weight 1/3: 1059 kg
Packaging dimensions 2/3: 970*290*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 550*300*180 mm
Packaging weight 3/3: 7.5 kg
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a
separate isolator.
Robust design, making it a popular choice for automotive maintenance.
Used for lifting vehicles to facilitate maintenance or repair work.
Code: E1531C
Product: 3 Ton short body turbo lift
*Colours and designs may differ
Technical information
Min height: 120 mm
Max height: 453mm
Strokes: 6.5
Net weight: 28 kg
Gross weight: 30 kg
Product size: 685*338*155 mm
Packaging dimensions: 710*385*200 mm
Features a full size frame unlike competitor models.
This crane is suitable for larger vehicles
such as Land Rovers and vans as well as cars. Whether you need to lift an engine or heavy machinery, this two tonne professional hydraulic engine crane can do the job perfectly.
Perfect for use by both professionals and amateur mechanics, this engine crane has a maximum weight capacity of 2,000kg and four jib positions, with a maximum capacity of 500kg when the jib is fully extended.
The crane’s integrated hydraulic ram delivers a maximum of 8 tons pushing force.
Model: Y9320
Product: 2 Ton foldable engine crane
*Colours and designs may differ
The Winntec Engine Crane is constructed from heavy gauge, welded square tubular steel.
The 2-speed hydraulic pump also rotates up to 135°, ensuring an optimal working position.
Winntec are an established and respected manufacturer, developer and supplier of quality, efficient and extremely reliable garage equipment – suitable for a vast range of applications
Model: Y440102
Product: 1 Ton foldable engine crane
*Colours and designs may differ
Technical information
Pump: 2-speed hydraulic
Rotation: 135 degrees
Number of positions: 3
Positions: 1000 / 750 / 500kg
Wheel mounted: Yes (castors)
Product dimensions (folded): 1475*465*480mm
Product dimensions (extended): 1470*945*1560mm
Weight: 90kg
Minimum height: 94mm
Maximum height: 2300mm
Packaging dimensions: 370*385*1420mm
A mini air die grinder offers a combination of precision, versatility, and efficiency, making it an essential tool for professionals and hobbyists alike.
Its ergonomic design, durability, and ease of use further enhance its value for a wide range of applications.
Model: WFG-1210
Product: Mini air die grinder
*Colours and designs may differ
Technical information
Collet: 1/4 “ , 18 “ ; 6 mm , 3 mm
Free speed: 25000 RPM
Angle: 0 °
Average air consumption: 4 CFM, 113 L/min
Air pressure: 90 PSI, 6.3 kg/cm2
Air inlet: 1/4 “
Lenght: 157 mm
Weight: 0.41 kg
The air hammer offers a combination of power, versatility, and efficiency, making it a valuable tool for various demanding applications.
Its ergonomic design, durability, and precision control further enhance its appeal for both professional and DIY users.
Model: WFH-1042
Product: Air hammer
*Colours and designs may differ
Technical information
Chisel shank: 10.2 mm , round
Free speed: 3500 RPM
Barrel stroke: 66 mm
Average air consumption: 4 cfm, 113 L/min
Air pressure: 90 PSI, 6.3 kg/cm2
Air inlet: 1/4 “
Length: 191 mm
Weight: 1.75 kg
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
