Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
- Clear filters
- Air & Pneumatic Tools
- Combo Packages
- Engine Cranes & Presses
- Wheel Alignment & Brake Lathes
The 15T Workshop press has a variety of uses, ideal for removing and installing bushes, ball joints, bearings, gears, pulleys etc.
It also has the added feature of a sliding head simply loosen the clamping plate bolts and the head of the press can be moved to the side allowing for those offset pressing jobs.
The 15 tonne hydraulic ram and pump unit are also easily removed for use on other pressing jobs outside your workshop such as straightening or bending.
The press is supplied with a pressure gauge, two heavy duty pressing plates and is constructed from industrial grade C channel making it ideal for mechanics or the
serious home workshop.
Model: HJ0822
Product: 15 Ton hydraulic press with gauge
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information
Capacity: 15 ton
Working range: 173 – 985 mm
Stroke: 160 mm
Bed width: 500 mm
Side stroke: 169 mm
Weight: 91 kg
Packing dimensions: 1660*665*270 mm
Hydraulic Shop Press are designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding is required.
Our 50 ton hydraulic workshop press can be operated by hand as well as by foot.
This garage press has a movable cylinder and the height of the work table is easy to adjust with a winch.
Model: YSD0811CE
Product: 50 Ton air hydraulic foot operated workshop press
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information
Ram stroke: 200mm
Side stroke: 245mm
Working range: 67 – 1047mm
Bed width: 730mm
Air pressure: 0.75 – 0.85 Mpa
Air inlet: ¼: NPT
Net weight: 302.4kg
Gross weight: 345kg
Packaging dimensions: 960*350*2010mm
The K1800 aligner can be used on a pit or lift system.
A wheel alignment machine is used to adjust a vehicle’s tracking.
The system connects a vehicle to its wheels.
It is not an adjustment of the tyres or wheels themselves.
The key to proper alignment is adjusting the angles of the tyres which affects how they make contact with the road.
Model: K1800
Product: 3D alignment machine (pit or lift – Fixed camera boom)
*Colours and designs may differ
Important notice!
• Aligner must be installed indoors.
• Approved installers must be used when installing aligners or warranty will be void.
• UPS required.
Technical information
Camber: ±45° ±0.01°
Caster: ±40° ±0.01°
S.A.I.: ±40° ±0.01°
Toe: ±30° ±0.01°
Chassis parameters: <4000mm ±1mm
Equipment specification
Operating temperature: -30°C – 50°C
Power voltage: 220V
Wheel size: 279.4 – 609.6mm
Tyre diameter: No limit
Power requirements: 120v/230v 1PH 50/60Hz
Profile of wheel adapter: 11 – 24”
Rolling compensation style: Forward-backward or backward-forward
Camera resolution: 1.3M
Suggested distance: 2300mm
Short bay distance: 1500mm
Distance between two cameras: 2400mm
Minimum width of vehicle: 1500mm
Maximum width of vehicle: 2400mm
Packaging dimensions: 1/2 1340*830*810* mm
Packaging weight: 1/2 170 kg
Packaging dimensions: 2/2 270*390*2820 mm
Packaging weight: 2/2 70 kg
OTCL400 On-car Brake Disc skimmer
This machine can be attached directly on a vehicles for resurfacing.
The existing model is upgraded and remodeled from customer-oriented perspectives to enable easier and safer car brake disc resurfacing.
Resurfacing particularly improves the performance of brake disc and shortens the braking distance to guarantee safer operation.
Model: OTCL400
Product: On-car Brake disc skimmer
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
This type of bench press is used in workshops and manufacturing settings for tasks that require applying a significant amount of force, such as bending, pressing, and straightening materials.
The gauge allows users to monitor the applied pressure, ensuring precision and safety during operations.
Model: HJ0802E
Product: 10 ton bench press with gauge
*Colours and designs may differ
Technical information
Capacity: 10 ton
Stroke: 175 mm
Working range: 110 – 364 mm
Bed width: 336 mm
Offering you the advantages of cost effective and efficient maintenance for a wide range of vehicle sizes, and also making it a valuable tool for service centers and mechanics servicing diverse vehicle fleets.
Model: ESW450
Product: Off car – Truck & Passenger brake lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Disc biggest diameter: 500mm
Disc biggest thickness: 40mm
Disc precision: ≤0.01mm
Desk height: 1200mm
Motor: 110v/220v 50/60Hz
Reduction motor power: 400w
Spindle revolution: 0-200RPM
Working temperature: -20ºC – 40ºC
Weight: 138kgFeatures and Benefits
A 1/2-inch impact wrench is a valuable tool for professionals and DIY enthusiasts alike due to its balance of power, versatility, and ease of use.
It is commonly used in automotive repair, construction, and general maintenance tasks.
Model: T117B
Product: ½” Impact wrench (max torque 520 N.m)
*Colours and designs may differ
Technical information
Square drive: ½”
Max torque: 350 ft.lb
Working pressure: 90 psi / 6.3 bar
Exhaust: Handle
Overall length: 120mm
Air inlet: ¼ “
Packaging dimensions: 190*19*70 mm
Packaging weight: 1.8 kg
Better known as the Fastest Brake lathe in the world. C9372 is capable of faster, more accurate and easier resurfacing.
Infinitely adjustable feed rates allow you to easily modify cut drums.
Variable speeds to allow cutting of the rotor.
Product: Brake disc/drum lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Rotor/disc diameter: 4 – 20” (102mm – 508mm)
Max Rotor/disc thickness: 2.85” (73mm)
Drum diameter: 6” – 19.5” (152mm – 500mm)
Drum depth: 6.5” (165mm)
Flywheel diameter: 6” – 24” (152mm – 610mm)
Spindle weight capacity: 150lbs (68kg)
Spindle speed: 70 – 320RPM
Feed rates – rotor & drum: 0” – 0.026” (0mm – 0.66mm)
Feed rate per minute: 2.54” (64.5mm)
Motor: 110V/220V 50/60Hz
Packaging dimensions: 1130*1030*1300mm
Weight: 300kg
Machine dimensions: 1100*730*720mm
The T8470 brake/disc drum lathe is a versatile, high-precision machine designed to enhance the safety and performance of vehicle braking systems through effective resurfacing of brake drums and discs.
Model: T8470
Product: Off car brake disc/drum lathe (Passenger & truck) *Colours and designs may differ
Technical information
Diameter of brake drum: 200 – 700 mm
Diameter of brake disc: <= 550 mm
Rotating speed: 30/54/80 r/min
Max travel of tool: 300 mm
Feed rate: 0.16 mm/r
Motor power: 1.5 kw
Packing dimensions: 100*905*1172 mm
Gross weight: 600 kg
The 98806P can be used to loosen bolts of truck and bus tyres.
Powerful tool used for heavy-duty fastening and loosening of large nuts, bolts, and other fasteners.
This tool is employed in industrial, automotive, construction, and manufacturing settings where significant torque is required.
Model: 98806P
Product: 1” Impact wrench
*Colours and designs may differ
Technical information
Hammer mechanism: Pin-less hammer
Square drive: 1”
Anvil length: 220mm
Free speed: 3200 R.P.M.
Bolt capacity: 42mm
Max torque: 3200N.M
Moment bound: 1500-3500N.M.
Air pressure: 5-8kg/cm2
Exhaust type: Side exhaust
Air inlet: ½”
Packaging dimensions: 710*280*190 mm
Packaging weight: 18 kg
The ultimate solution for wheel repairs and balancing
IMRP– Rim Repair Machine with Swing Lathe
The IMRP is used to correct defected rims/mags.
It corrects and levels the rims and makes the surface smooth using the lathe.
The lathe unit is designed to clean crusty sections of the repaired rim surface.
XTB820 – Hand spun passenger wheel balancer
The XTB820 wheel balancer is the perfect companion to the XTC428B tyre changing machine. Small and compact, it is an electronic balancing machine with microprocessor designed for balancing wheels weighting up to 65kg.
The push button controlled calibration system allows a range of adjustment which is also sufficient to cover wheels. Differing from ordinary ones (motorcycles and racing cars).
Special functions are also available to cater for wheels of unusual shape and there is provision for optional functions of the balancing machine.
The operator will enter the 3 specifications of offset, wheel width and wheel diameter before spinning the wheel for the balancing process.
The balancer will then indicate the weight placement required and its value. Simple, compact, affordable and accurate the XTB820 is also ideal for use in a in a compact workshop environment as well as a mobile tyre fitting operation.
Features a full size frame unlike competitor models.
This crane is suitable for larger vehicles
such as Land Rovers and vans as well as cars. Whether you need to lift an engine or heavy machinery, this two tonne professional hydraulic engine crane can do the job perfectly.
Perfect for use by both professionals and amateur mechanics, this engine crane has a maximum weight capacity of 2,000kg and four jib positions, with a maximum capacity of 500kg when the jib is fully extended.
The crane’s integrated hydraulic ram delivers a maximum of 8 tons pushing force.
Model: Y9320
Product: 2 Ton foldable engine crane
*Colours and designs may differ
The Winntec Engine Crane is constructed from heavy gauge, welded square tubular steel.
The 2-speed hydraulic pump also rotates up to 135°, ensuring an optimal working position.
Winntec are an established and respected manufacturer, developer and supplier of quality, efficient and extremely reliable garage equipment – suitable for a vast range of applications
Model: Y440102
Product: 1 Ton foldable engine crane
*Colours and designs may differ
Technical information
Pump: 2-speed hydraulic
Rotation: 135 degrees
Number of positions: 3
Positions: 1000 / 750 / 500kg
Wheel mounted: Yes (castors)
Product dimensions (folded): 1475*465*480mm
Product dimensions (extended): 1470*945*1560mm
Weight: 90kg
Minimum height: 94mm
Maximum height: 2300mm
Packaging dimensions: 370*385*1420mm
Scissor stands are suitable for either on a motorcycle lift or on the floor.
Fitted with ball bearing rollers for smooth lifting and lowering. Raise by hand or with a sliding T-bar.
Comes with non-slip rubber for added security.
Great for providing easy access to motorcycles for repair & maintenance tasks, the foot pedal operated pneumatic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, it reduces the amount of strain involved with working on motorcycles, as it allows users to access the vital components of the bike without having to bend down or kneel.
A mini air die grinder offers a combination of precision, versatility, and efficiency, making it an essential tool for professionals and hobbyists alike.
Its ergonomic design, durability, and ease of use further enhance its value for a wide range of applications.
Model: WFG-1210
Product: Mini air die grinder
*Colours and designs may differ
Technical information
Collet: 1/4 “ , 18 “ ; 6 mm , 3 mm
Free speed: 25000 RPM
Angle: 0 °
Average air consumption: 4 CFM, 113 L/min
Air pressure: 90 PSI, 6.3 kg/cm2
Air inlet: 1/4 “
Lenght: 157 mm
Weight: 0.41 kg
The air hammer offers a combination of power, versatility, and efficiency, making it a valuable tool for various demanding applications.
Its ergonomic design, durability, and precision control further enhance its appeal for both professional and DIY users.
Model: WFH-1042
Product: Air hammer
*Colours and designs may differ
Technical information
Chisel shank: 10.2 mm , round
Free speed: 3500 RPM
Barrel stroke: 66 mm
Average air consumption: 4 cfm, 113 L/min
Air pressure: 90 PSI, 6.3 kg/cm2
Air inlet: 1/4 “
Length: 191 mm
Weight: 1.75 kg
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
