Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
Manual upright tyre spreader for cars & light trucks.
It is designed for locking and subsequent spreading of tyres.
The machine allows performing such functions as inspection, sanding, polishing, dust extraction and patching. (No air required) tyre width: 100 – 375mm
Product: Manual tyre spreader
*Colours and designs may differ
Technical Information
Tyre spread: 100mm
Maximum tyre width: 380mm
Swivel platform: 360°
Maximum tilt: 90°
Spreader position adjustment: 4-Position
Biggest enlargement: 380mm
Packaging dimensions: 930*400*340 mm
Packaging weight: 25 kg
The K1800 aligner can be used on a pit or lift system.
A wheel alignment machine is used to adjust a vehicle’s tracking.
The system connects a vehicle to its wheels.
It is not an adjustment of the tyres or wheels themselves.
The key to proper alignment is adjusting the angles of the tyres which affects how they make contact with the road.
Model: K1800
Product: 3D alignment machine (pit or lift – Fixed camera boom)
*Colours and designs may differ
Important notice!
• Aligner must be installed indoors.
• Approved installers must be used when installing aligners or warranty will be void.
• UPS required.
Technical information
Camber: ±45° ±0.01°
Caster: ±40° ±0.01°
S.A.I.: ±40° ±0.01°
Toe: ±30° ±0.01°
Chassis parameters: <4000mm ±1mm
Equipment specification
Operating temperature: -30°C – 50°C
Power voltage: 220V
Wheel size: 279.4 – 609.6mm
Tyre diameter: No limit
Power requirements: 120v/230v 1PH 50/60Hz
Profile of wheel adapter: 11 – 24”
Rolling compensation style: Forward-backward or backward-forward
Camera resolution: 1.3M
Suggested distance: 2300mm
Short bay distance: 1500mm
Distance between two cameras: 2400mm
Minimum width of vehicle: 1500mm
Maximum width of vehicle: 2400mm
Packaging dimensions: 1/2 1340*830*810* mm
Packaging weight: 1/2 170 kg
Packaging dimensions: 2/2 270*390*2820 mm
Packaging weight: 2/2 70 kg
OTCL400 On-car Brake Disc skimmer
This machine can be attached directly on a vehicles for resurfacing.
The existing model is upgraded and remodeled from customer-oriented perspectives to enable easier and safer car brake disc resurfacing.
Resurfacing particularly improves the performance of brake disc and shortens the braking distance to guarantee safer operation.
Model: OTCL400
Product: On-car Brake disc skimmer
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
The BB-05 is designed to assist in the inflation of tubeless tires by setting the bead with a quick release of air pressure. To use it efficiently, simply fill the tank to the necessary pressure and attach an air line to the valve stem of the wheel.
Then aim the barrel between the tyre bead and wheel flange, and release the manual valve in order to allow a blast of air to set the bead. Used on Auto, ATV, and Truck tyres.
Model: BB-05
Product: 5 Gallon Bead Booster
*Colours and designs may differ
*Designed & Engineered in USA
Offering you the advantages of cost effective and efficient maintenance for a wide range of vehicle sizes, and also making it a valuable tool for service centers and mechanics servicing diverse vehicle fleets.
Model: ESW450
Product: Off car – Truck & Passenger brake lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Disc biggest diameter: 500mm
Disc biggest thickness: 40mm
Disc precision: ≤0.01mm
Desk height: 1200mm
Motor: 110v/220v 50/60Hz
Reduction motor power: 400w
Spindle revolution: 0-200RPM
Working temperature: -20ºC – 40ºC
Weight: 138kgFeatures and Benefits
A 1/2-inch impact wrench is a valuable tool for professionals and DIY enthusiasts alike due to its balance of power, versatility, and ease of use.
It is commonly used in automotive repair, construction, and general maintenance tasks.
Model: T117B
Product: ½” Impact wrench (max torque 520 N.m)
*Colours and designs may differ
Technical information
Square drive: ½”
Max torque: 350 ft.lb
Working pressure: 90 psi / 6.3 bar
Exhaust: Handle
Overall length: 120mm
Air inlet: ¼ “
Packaging dimensions: 190*19*70 mm
Packaging weight: 1.8 kg
Better known as the Fastest Brake lathe in the world. C9372 is capable of faster, more accurate and easier resurfacing.
Infinitely adjustable feed rates allow you to easily modify cut drums.
Variable speeds to allow cutting of the rotor.
Product: Brake disc/drum lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Rotor/disc diameter: 4 – 20” (102mm – 508mm)
Max Rotor/disc thickness: 2.85” (73mm)
Drum diameter: 6” – 19.5” (152mm – 500mm)
Drum depth: 6.5” (165mm)
Flywheel diameter: 6” – 24” (152mm – 610mm)
Spindle weight capacity: 150lbs (68kg)
Spindle speed: 70 – 320RPM
Feed rates – rotor & drum: 0” – 0.026” (0mm – 0.66mm)
Feed rate per minute: 2.54” (64.5mm)
Motor: 110V/220V 50/60Hz
Packaging dimensions: 1130*1030*1300mm
Weight: 300kg
Machine dimensions: 1100*730*720mm
The T8470 brake/disc drum lathe is a versatile, high-precision machine designed to enhance the safety and performance of vehicle braking systems through effective resurfacing of brake drums and discs.
Model: T8470
Product: Off car brake disc/drum lathe (Passenger & truck) *Colours and designs may differ
Technical information
Diameter of brake drum: 200 – 700 mm
Diameter of brake disc: <= 550 mm
Rotating speed: 30/54/80 r/min
Max travel of tool: 300 mm
Feed rate: 0.16 mm/r
Motor power: 1.5 kw
Packing dimensions: 100*905*1172 mm
Gross weight: 600 kg
Specialized tool used in the tire and automotive industry for breaking the bead seal on tires.
This tool is essential for changing tires, repairing punctures, or performing other maintenance tasks that require the tire to be separated from the wheel.
Model: HS-C109
Product: Bead knocker
*Colours and designs may differ
The 98806P can be used to loosen bolts of truck and bus tyres.
Powerful tool used for heavy-duty fastening and loosening of large nuts, bolts, and other fasteners.
This tool is employed in industrial, automotive, construction, and manufacturing settings where significant torque is required.
Model: 98806P
Product: 1” Impact wrench
*Colours and designs may differ
Technical information
Hammer mechanism: Pin-less hammer
Square drive: 1”
Anvil length: 220mm
Free speed: 3200 R.P.M.
Bolt capacity: 42mm
Max torque: 3200N.M
Moment bound: 1500-3500N.M.
Air pressure: 5-8kg/cm2
Exhaust type: Side exhaust
Air inlet: ½”
Packaging dimensions: 710*280*190 mm
Packaging weight: 18 kg
The DB88 tyre vulcanizer is used to repair passenger and light truck tubeless tyres (repair the tyre shoulder/sidewalls).
Model: DB88
Product: Tyre vulcanizer/spotter
*Colours and designs may differ
Technical Information
Supply voltage: 220V
Power: 800W
Vulcanizing temperature: Auto controlled
Applicable range: 750 to 10.00-20 tyres
Packaging dimensions: 600*1150*300 mm
Packaging weight: 80 kg
Designed for servicing and repairing medium / heavy duty truck tyres, adjustable spreading for improved access and safety, integrated lifting device with a lifting height of 17.50 inches.
A ramp that automatically retracts as the tyre if lifted and durable ball-bearing rollers.
Model: QD62
Product: Truck tyre speader with ramp
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Tyre width: 1.200-20 large and medium sized tyres
Working pressure: 0.8 – 1.0 Mpa
Packing dimensions: 1250*850*740 mm
Weight: 160 kg
Tyres with nitrogen are said to have several advantages over simple air inflation.
Last but not least, the inflation gas has a positive side effect, the tyre pressure should remain constant for a longer period of time.
With the help of nitrogen generators, you can obtain an unlimited amount of N2 for the tyres of any vehicle directly on site, whether motorcycles, cars, trucks, buses or commercial vehicles.
The HWN90 is a mobile unit with a storage tank, all you need is a power point to operate the machine.
Model: HWN90
Product: Truck Nitrogen Generator
*Colours and designs may differ
Technical Information
Temperature range: -20 – 70°C
Power source: AC110V/220V, 50-60Hz
Power: 120W
Inlet pressure: 10 – 15bar, 1 – 1.5 Mpa
Nitrogen outlet pressure: 10 – 12bar, 1 – 1.2 Mpa
Nitrogen purity: 95% – 99.5%
Internal storage tank: 160L
Packaging dimensions: 1/2 900*1600*570 mm
Packaging weight: 1/2 200 kg
Packaging dimensions: 2/2 45*1600*565 mm
Packaging weight: 2/2 80 kg
The HWP600 Digital Wall Mounted Tyre Inflator is a wall mountable inflation system.
Simply set the required pressure, connect the airline and then let this automatic inflator do the rest.
Model: HWP600
Product: Wall mounted digital inflator
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Dimensions: 190*252*68mm
Temperature range: -20 – 70°C
Power source: AC220V, 50/60Hz
Power consumption: 10W
Max Inlet Pressure: 1200 MPa
Inflating pressure range – car: <0.5 MPa
Inflating pressure range – truck: <1.0 MPa
Accuracy: < 0.005MPa
Pressure unit: PSI / bar / KPa / kg/cm2
Packaging dimensions: 410*400*100 mm
Packaging weight: 5 kg
A mini air die grinder offers a combination of precision, versatility, and efficiency, making it an essential tool for professionals and hobbyists alike.
Its ergonomic design, durability, and ease of use further enhance its value for a wide range of applications.
Model: WFG-1210
Product: Mini air die grinder
*Colours and designs may differ
Technical information
Collet: 1/4 “ , 18 “ ; 6 mm , 3 mm
Free speed: 25000 RPM
Angle: 0 °
Average air consumption: 4 CFM, 113 L/min
Air pressure: 90 PSI, 6.3 kg/cm2
Air inlet: 1/4 “
Lenght: 157 mm
Weight: 0.41 kg
The air hammer offers a combination of power, versatility, and efficiency, making it a valuable tool for various demanding applications.
Its ergonomic design, durability, and precision control further enhance its appeal for both professional and DIY users.
Model: WFH-1042
Product: Air hammer
*Colours and designs may differ
Technical information
Chisel shank: 10.2 mm , round
Free speed: 3500 RPM
Barrel stroke: 66 mm
Average air consumption: 4 cfm, 113 L/min
Air pressure: 90 PSI, 6.3 kg/cm2
Air inlet: 1/4 “
Length: 191 mm
Weight: 1.75 kg
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
