Need help? Call us: +27 63 385 8305 or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
BP887N Fully Automatic Tilt Back Tyre Changer
The BP887 fully-automatic tyre changer is suitable for handling 13”-26” wheels.
It can mount and demount tyres from passenger to LDV vehicles.
It is especially suitable for wide tyres and can be equipped with an optional helper arm. Designed and Engineered in Europe.
Model: BP887N
Product: Passenger Tyre Changer
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information:
Outside clamping range: 11” – 24” inch
Inside clamping range: 13” – 26” inch
Rim width: 3” – 14” inch
Max wheel diameter: 1100 mm
Working pressure: 8 – 10 bar
Bead breaker force: 2800 kg
Power supply: 220V
Motor power: 0.75kW/1.1kW
Rotation per minute: 6.5/13rpm
Noise: <70 dB
Machine dimensions: 1900*1400*2050 mm
Packing dimensions: 1150*920*1000 mm
Machine weight: 325 kg
Packaging weight: 285 kg
The K1800 aligner can be used on a pit or lift system.
A wheel alignment machine is used to adjust a vehicle’s tracking.
The system connects a vehicle to its wheels.
It is not an adjustment of the tyres or wheels themselves.
The key to proper alignment is adjusting the angles of the tyres which affects how they make contact with the road.
Model: K1800
Product: 3D alignment machine (pit or lift – Fixed camera boom)
*Colours and designs may differ
Important notice!
• Aligner must be installed indoors.
• Approved installers must be used when installing aligners or warranty will be void.
• UPS required.
Technical information
Camber: ±45° ±0.01°
Caster: ±40° ±0.01°
S.A.I.: ±40° ±0.01°
Toe: ±30° ±0.01°
Chassis parameters: <4000mm ±1mm
Equipment specification
Operating temperature: -30°C – 50°C
Power voltage: 220V
Wheel size: 279.4 – 609.6mm
Tyre diameter: No limit
Power requirements: 120v/230v 1PH 50/60Hz
Profile of wheel adapter: 11 – 24”
Rolling compensation style: Forward-backward or backward-forward
Camera resolution: 1.3M
Suggested distance: 2300mm
Short bay distance: 1500mm
Distance between two cameras: 2400mm
Minimum width of vehicle: 1500mm
Maximum width of vehicle: 2400mm
Packaging dimensions: 1/2 1340*830*810* mm
Packaging weight: 1/2 170 kg
Packaging dimensions: 2/2 270*390*2820 mm
Packaging weight: 2/2 70 kg
OTCL400 On-car Brake Disc skimmer
This machine can be attached directly on a vehicles for resurfacing.
The existing model is upgraded and remodeled from customer-oriented perspectives to enable easier and safer car brake disc resurfacing.
Resurfacing particularly improves the performance of brake disc and shortens the braking distance to guarantee safer operation.
Model: OTCL400
Product: On-car Brake disc skimmer
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
High-quality machine designed with garages and small tyre centers in mind.
This semi automatic tyre changer with swing arm and helper arm is a medium duty, air-electric tyre changer for car and light commercial wheels with 11” – 26” rim diameter and will assist with difficult tyres.
High quality mounting and de-mounting head equipped with protectors to safeguard wheels.
Water trap & oil lubricator. Stainless steal bead breaking cylinder.
Model: BP890S
Product: Passenger semi auto swing arm tyre changer with helper arm
**European Designed & Engineered in Italy
Technical information
Outside clamping range: 11” – 24” inch
Inside clamping range: 13” – 26” inch
Rim width: 3” – 13” inch
Max wheel diameter: 1250 mm
Working pressure: 8 – 10 bar
Bead breaker force: 2500 kg
Power supply: 220V
Motor power: 0.75kW/1.1kW
Rotation per minute: 6.5 rpm
Noise: <70 dB
Machine dimensions: 1350*1300*1960 mm
Packing dimensions: 1150*920*1050 mm
Net weight: 239 kg
Gross weight: 269 kg
The SD-18 is a durable, manual motorcycle tyre changer designed for workshops, small
garages, and riders who prefer doing their own tyre changes. With no air or electricity required, it’s portable, reliable, and easy to use.
Model: SD18
Product: Manual Motorcycle tyre changer
*Colours and designs may differ
Technical information
Tyre range: 8” – 22”
Machine weight: 35kg
Power: Fully manual – no air or electricity needed
Offering you the advantages of cost effective and efficient maintenance for a wide range of vehicle sizes, and also making it a valuable tool for service centers and mechanics servicing diverse vehicle fleets.
Model: ESW450
Product: Off car – Truck & Passenger brake lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Disc biggest diameter: 500mm
Disc biggest thickness: 40mm
Disc precision: ≤0.01mm
Desk height: 1200mm
Motor: 110v/220v 50/60Hz
Reduction motor power: 400w
Spindle revolution: 0-200RPM
Working temperature: -20ºC – 40ºC
Weight: 138kgFeatures and Benefits
The ideal machine for a small workshop or service station.
The BP810 is a semiautomatic tyre machine equipped with a sideways rotating mounting arm, allowing the machine to be placed in small spaces.
The machine is robust and suitable for standard wheels from 10”to 23”inches.
This powerful tyre changer handles everything from simple standard steel wheels to large delicate custom alloy wheels. T
he control pedals have a stop-move function that can stop the chuck jaws at any position to easily tighten the rim. It can also be equipped with a motorcycle adapter kit for the mounting/demounting or motorcycle tyres.
Model: BP810
Product: Passenger semi auto swing arm tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
A 1/2-inch impact wrench is a valuable tool for professionals and DIY enthusiasts alike due to its balance of power, versatility, and ease of use.
It is commonly used in automotive repair, construction, and general maintenance tasks.
Model: T117B
Product: ½” Impact wrench (max torque 520 N.m)
*Colours and designs may differ
Technical information
Square drive: ½”
Max torque: 350 ft.lb
Working pressure: 90 psi / 6.3 bar
Exhaust: Handle
Overall length: 120mm
Air inlet: ¼ “
Packaging dimensions: 190*19*70 mm
Packaging weight: 1.8 kg
Helper arm to assist in mounting low profile or run flat tyres, reduces fatigue and allows the operator to work very efficiently with minimal effort.
Helper arm for BP887n
Designed and Engineered in Europe.
Model: AL320
Product: Helper arm for tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
The Bright BP590D tyre changer is used to mount and demount truck, agriculture and industrial tyres.
The tool head rotates 360 degrees and is equipped with a tool arm with automatic tilt back function.
It is equipped with a hydraulic driven carriage allowing the tyre to move on the tyre changer without using manual labor.
The small and portable console is very convenient to observe from different angles during operation.
Model: BP590D
Product: Truck tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information
Rim diameter: 14” – 46” inch
Rim range with extension: 46” – 56” inch
Rim width: 1100 mm
Max wheel diameter: 2200 mm
Hydraulic power: 130 – 150 bar
Hydraulic station motor power: 1.5kW / 380V
Main shaft motor power: 2.4kW / 380V
Noise: <75dB
Machine dimensions: 2500*1800*2100 mm
Packaging dimensions: 2280*2070*1070 mm
Machine weight: 891 kg
Packaging weight: 1152kg
Leverless tyre changers revolutionize the tyre-changing process with innovative technology that eliminates the need for manual tools like tyre irons.
They efficiently demount and mount tyres onto rims, safeguarding both tyre and wheel from damage.
Featuring user-friendly interfaces and versatile capabilities, leverless tyre changers enhance productivity, ensure safety, and offer long-term cost savings for automotive service centers.
Model: BP8650
Product: Leverless tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information
Outside clamping range: 13” – 30”
Rim width: 15”
Max wheel diameter: 47”
Working pressure: 8 -10 bar
Bead breaking force: 9800 N
Voltage: 200 V – 240 V
Motor power: 0.85 Kw
Rotation per minute: 0 – 13 Rpm
Torque: 1200 N
Noise: < 70 dB
Better known as the Fastest Brake lathe in the world. C9372 is capable of faster, more accurate and easier resurfacing.
Infinitely adjustable feed rates allow you to easily modify cut drums.
Variable speeds to allow cutting of the rotor.
Product: Brake disc/drum lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Rotor/disc diameter: 4 – 20” (102mm – 508mm)
Max Rotor/disc thickness: 2.85” (73mm)
Drum diameter: 6” – 19.5” (152mm – 500mm)
Drum depth: 6.5” (165mm)
Flywheel diameter: 6” – 24” (152mm – 610mm)
Spindle weight capacity: 150lbs (68kg)
Spindle speed: 70 – 320RPM
Feed rates – rotor & drum: 0” – 0.026” (0mm – 0.66mm)
Feed rate per minute: 2.54” (64.5mm)
Motor: 110V/220V 50/60Hz
Packaging dimensions: 1130*1030*1300mm
Weight: 300kg
Machine dimensions: 1100*730*720mm
The T8470 brake/disc drum lathe is a versatile, high-precision machine designed to enhance the safety and performance of vehicle braking systems through effective resurfacing of brake drums and discs.
Model: T8470
Product: Off car brake disc/drum lathe (Passenger & truck) *Colours and designs may differ
Technical information
Diameter of brake drum: 200 – 700 mm
Diameter of brake disc: <= 550 mm
Rotating speed: 30/54/80 r/min
Max travel of tool: 300 mm
Feed rate: 0.16 mm/r
Motor power: 1.5 kw
Packing dimensions: 100*905*1172 mm
Gross weight: 600 kg
The 98806P can be used to loosen bolts of truck and bus tyres.
Powerful tool used for heavy-duty fastening and loosening of large nuts, bolts, and other fasteners.
This tool is employed in industrial, automotive, construction, and manufacturing settings where significant torque is required.
Model: 98806P
Product: 1” Impact wrench
*Colours and designs may differ
Technical information
Hammer mechanism: Pin-less hammer
Square drive: 1”
Anvil length: 220mm
Free speed: 3200 R.P.M.
Bolt capacity: 42mm
Max torque: 3200N.M
Moment bound: 1500-3500N.M.
Air pressure: 5-8kg/cm2
Exhaust type: Side exhaust
Air inlet: ½”
Packaging dimensions: 710*280*190 mm
Packaging weight: 18 kg
The BP8630 Swing Arm Tyre Changer with Helper Arm is a versatile, heavy-duty machine designed for handling a wide range of tyre sizes.
Its swing arm design allows for easy positioning of the mounting head, and the integrated helper arm assists with the installation and removal of low-profile and run-flat tyres.
This tyre changer is equipped with a robust clamping system and features a user-friendly control panel, making it ideal for professional workshops.
It enhances efficiency and reduces the risk of tyre damage during mounting and demounting.
Model: BP8630
Product: Swing arm tyre changer with helper arm
*Colours and designs may differ
**European Designed & Engineered in Italy
Technical information:
Inside clamping range: 12” – 28”
Outside clamping range: 14” – 30”
Rim width: 15” (380mm)
Max Wheel diameter: 49” (1250mm)
Working pressure: 8 – 10 bar
Rated torque: 1200N.m
Power supply: 220V
Motor power: 0.85KW
Rotation per minute: 0 – 13 rpm
The BP889N Tyre Changer from Bright is a high-performance, fully automatic machine designed for efficient and precise tyre mounting and demounting.
Equipped with a pneumatic tilting arm, a robust turntable, and a powerful bead breaker, the BP889N is ideal for handling a wide range of tyres, including low-profile and run-flat types.
Its durable construction and user-friendly controls ensure reliability and ease of use in busy workshops, making it a versatile choice for both standard and specialty tyre services.
Designed and Engineered in Europe.
Model: BP889N
Product: Fully automatic tyre changer
*Colours and designs may differ
**European Designed & Engineered in Italy
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
