Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
The K1800 aligner can be used on a pit or lift system.
A wheel alignment machine is used to adjust a vehicle’s tracking.
The system connects a vehicle to its wheels.
It is not an adjustment of the tyres or wheels themselves.
The key to proper alignment is adjusting the angles of the tyres which affects how they make contact with the road.
Model: K1800
Product: 3D alignment machine (pit or lift – Fixed camera boom)
*Colours and designs may differ
Important notice!
• Aligner must be installed indoors.
• Approved installers must be used when installing aligners or warranty will be void.
• UPS required.
Technical information
Camber: ±45° ±0.01°
Caster: ±40° ±0.01°
S.A.I.: ±40° ±0.01°
Toe: ±30° ±0.01°
Chassis parameters: <4000mm ±1mm
Equipment specification
Operating temperature: -30°C – 50°C
Power voltage: 220V
Wheel size: 279.4 – 609.6mm
Tyre diameter: No limit
Power requirements: 120v/230v 1PH 50/60Hz
Profile of wheel adapter: 11 – 24”
Rolling compensation style: Forward-backward or backward-forward
Camera resolution: 1.3M
Suggested distance: 2300mm
Short bay distance: 1500mm
Distance between two cameras: 2400mm
Minimum width of vehicle: 1500mm
Maximum width of vehicle: 2400mm
Packaging dimensions: 1/2 1340*830*810* mm
Packaging weight: 1/2 170 kg
Packaging dimensions: 2/2 270*390*2820 mm
Packaging weight: 2/2 70 kg
OTCL400 On-car Brake Disc skimmer
This machine can be attached directly on a vehicles for resurfacing.
The existing model is upgraded and remodeled from customer-oriented perspectives to enable easier and safer car brake disc resurfacing.
Resurfacing particularly improves the performance of brake disc and shortens the braking distance to guarantee safer operation.
Model: OTCL400
Product: On-car Brake disc skimmer
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
The ideal combination for dispensing oil in any workplace.
The compact trolley has two fixed wheels and two castors that make it very easy to maneuverer.
It is equipped with a pump support and a drum clamping mechanism designed for a 210 Liter drum.
The pneumatic pump is able to dispense 14 Liters per minute and the digital oil gun displays both short and long term measurements.
The short term display can be easily reset before the gun is needed for the next vehicle, however the total amount cannot be reset which helps with stock control.
Code: K99235
Product: Trolley – mounted oil dispenser with digital oil gun
*Colours and designs may differ
1 year warranty
Technical information digital oil meter gun
Flow rate range: 0-35 L/m
Operating Pressure (maximum): 1500 psi/100 Bar
Working temperature: -10°C – +50C
Accuracy (non- approved version): ± 0.5%
Accuracy (approved version): ± 0.3%
Applied viscosity of fluid: 8-5000mPas
5- digit LCD display: Liters
Inlet and outlet connections: ½” BSP
Technical information oil pump
Compression ratio: 5:1
Operating pressure: 5-8 Bar
Air consumption: 240 Liter per minute
Capacity: 14 Liters per minute
Max oil viscosity: 130SAE
Operating temperature: 10°-50°C
Noise level: 82dB
Packaging dimensions 1/3: 660*810*100 mm
Packaging weight 1/3: 23 kg
Packaging dimensions 2/3: 1290*130*130 mm
Packaging weight 2/3: 7 kg
Packaging dimensions 3/3: 630*140*140 mm
Packaging weight 3/3: 2.5kg
Offering you the advantages of cost effective and efficient maintenance for a wide range of vehicle sizes, and also making it a valuable tool for service centers and mechanics servicing diverse vehicle fleets.
Model: ESW450
Product: Off car – Truck & Passenger brake lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Disc biggest diameter: 500mm
Disc biggest thickness: 40mm
Disc precision: ≤0.01mm
Desk height: 1200mm
Motor: 110v/220v 50/60Hz
Reduction motor power: 400w
Spindle revolution: 0-200RPM
Working temperature: -20ºC – 40ºC
Weight: 138kgFeatures and Benefits
Better known as the Fastest Brake lathe in the world. C9372 is capable of faster, more accurate and easier resurfacing.
Infinitely adjustable feed rates allow you to easily modify cut drums.
Variable speeds to allow cutting of the rotor.
Product: Brake disc/drum lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical Information
Rotor/disc diameter: 4 – 20” (102mm – 508mm)
Max Rotor/disc thickness: 2.85” (73mm)
Drum diameter: 6” – 19.5” (152mm – 500mm)
Drum depth: 6.5” (165mm)
Flywheel diameter: 6” – 24” (152mm – 610mm)
Spindle weight capacity: 150lbs (68kg)
Spindle speed: 70 – 320RPM
Feed rates – rotor & drum: 0” – 0.026” (0mm – 0.66mm)
Feed rate per minute: 2.54” (64.5mm)
Motor: 110V/220V 50/60Hz
Packaging dimensions: 1130*1030*1300mm
Weight: 300kg
Machine dimensions: 1100*730*720mm
The T8470 brake/disc drum lathe is a versatile, high-precision machine designed to enhance the safety and performance of vehicle braking systems through effective resurfacing of brake drums and discs.
Model: T8470
Product: Off car brake disc/drum lathe (Passenger & truck) *Colours and designs may differ
Technical information
Diameter of brake drum: 200 – 700 mm
Diameter of brake disc: <= 550 mm
Rotating speed: 30/54/80 r/min
Max travel of tool: 300 mm
Feed rate: 0.16 mm/r
Motor power: 1.5 kw
Packing dimensions: 100*905*1172 mm
Gross weight: 600 kg
The Y4441000 from Winntec is a 10-ton collision repair kit, commonly referred to as a “Porta Power.”
This versatile toolset is designed for various applications in garages and workshops, enabling users to perform clamping, pulling, bending, straightening, spreading, and lifting tasks efficiently.
Model: Y444100
Product: 10t collision repair kit
*Colours and designs may differ
Scope of delivery
– Single Speed Hand Pump
– Cylinder (100 mm – 150mm stroke)
– Hose
– Ram Flat Base
– Spreader
– 100 mm Extension Tube
– 150 mm Extension Tube
– 300 mm Extension Tube
– 400 mm Extension Tube
– Tube Coupling
– Ram Toe
– Wedge Head
– Serrated Saddle
– Flex Head
– Plunger Toe
– 90 Degrees Wedge Head
– Storage Case
The ultimate solution for wheel repairs and balancing
IMRP– Rim Repair Machine with Swing Lathe
The IMRP is used to correct defected rims/mags.
It corrects and levels the rims and makes the surface smooth using the lathe.
The lathe unit is designed to clean crusty sections of the repaired rim surface.
XTB820 – Hand spun passenger wheel balancer
The XTB820 wheel balancer is the perfect companion to the XTC428B tyre changing machine. Small and compact, it is an electronic balancing machine with microprocessor designed for balancing wheels weighting up to 65kg.
The push button controlled calibration system allows a range of adjustment which is also sufficient to cover wheels. Differing from ordinary ones (motorcycles and racing cars).
Special functions are also available to cater for wheels of unusual shape and there is provision for optional functions of the balancing machine.
The operator will enter the 3 specifications of offset, wheel width and wheel diameter before spinning the wheel for the balancing process.
The balancer will then indicate the weight placement required and its value. Simple, compact, affordable and accurate the XTB820 is also ideal for use in a in a compact workshop environment as well as a mobile tyre fitting operation.
Scissor stands are suitable for either on a motorcycle lift or on the floor.
Fitted with ball bearing rollers for smooth lifting and lowering. Raise by hand or with a sliding T-bar.
Comes with non-slip rubber for added security.
Great for providing easy access to motorcycles for repair & maintenance tasks, the foot pedal operated pneumatic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, it reduces the amount of strain involved with working on motorcycles, as it allows users to access the vital components of the bike without having to bend down or kneel.
The RST1600 is used to inspect the shock absorption performance of vehicles with a total weight of 3 tons.
Model: RST1600
Product: Suspension tester
Technical information
Axle load: 3Ton
Power supply: 380V / 50 HZ
Motor power: 1.5kwx2
Track: 880-2200mm
Amplitude: 6mm
Frequency: 23H
Packaging dimensions: 1/4 970*290*350 mm
Packaging weight: 1/4 230 kg
Packaging dimensions: 2/4 970*290*350 mm
Packaging weight: 2/4 230 kg
Packaging dimensions: 3/4 600*640*350 mm
Packaging weight: 3/4 20 kg
Packaging dimensions: 4/4 720*720*1300 mm
Packaging weight: 4/4 90kg
The X96 aligner is perfect for usage on a 4post or scissor alignment lifts thanks to it’s auto tracking system.
A wheel alignment machine is used to adjust a vehicle’s tracking.
The system connects a vehicle to its wheels. It is not an adjustment of the tyres or wheels themselves.
The key to proper alignment is adjusting the angles of the tyres which affects how they make contact with the road.
Model: X96
Product: Auto Tracking Intelligent 3D Wheel Alignment
*Colours and designs may differ
Equipment specification
Operating temperature: -30°C – 50°C
Power consumption: 300W
Wheel size: 279.4 – 609.6mm
Tyre diameter: No limit
Power requirements: 120v/230v 1PH 50/60Hz
Profile of wheel adapter: 11 – 24”
Rolling compensation style: Forward-backward or backward-forward
Camera resolution: 5M
Distance to wall: 1600 – 3000mm
Suggested distance: 2300mm
Short bay distance: 1500mm
Distance between two cameras: 2400mm
Minimum width of vehicle: 1500mm
Maximum width of vehicle: 2400mm
Packaging dimensions 1/2: 1340*830*810* mm
Packaging weight 1/2: 70 kg
Packaging dimensions 2/2: 270*390*2820 mm
Packaging weight 2/2: 70 kg
Important notice!
• Aligner must be installed indoors.
• Approved installers must be used when installing aligners or warranty will be void.
• UPS required.
On-car & off-car type Car brake disk cutting machine.
It’s a luxury model of car brake disc machine.
It’s on-car & off-car type. Duel side cutting when work on brake disc, about 8 minutes per disc.
Easy to operate and reasonable structure.
Model: OTCL500
Product: On and off car brake disc lathe
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Stop Chasing Crooked Steering Wheels!
We’ve all dealt with the ultimate post-alignment headache: the car drives perfectly straight, but the steering wheel is visibly crooked.
The IM WINNERS Steering Wheel Centering Tool eliminates the guesswork and the costly re-work.
By locking the steering wheel perfectly level before your alignment technician even touches the suspension, it guarantees a flawless, centered result on the very first try.
Winntec Combo
R4,945.00Winntec 3 ton low-profile turbo-lift trolley jack supplied together with a set of 3 ton ratchet trestle jack stands — everything a bay needs to lift a vehicle and hold it safely. Both items brand-new, price includes VAT.
Start up garage combo
R36,000.00A complete first fit-out for a new tyre bay: LN850s semi-automatic tyre changer, WB70A laser wheel balancer, E1531C 3 ton short-body trolley jack and a set of Y450301 3 ton ratchet trestles — supplied together as one package. Price includes VAT.
Designed specifically for automotive professionals and enthusiasts who spend extended periods working on vehicles.
This seat combines ergonomic design, durable construction, and practical features to enhance comfort and efficiency while performing detailed work on vehicles.
Model: JTM40000
Product: Working chair mechanic’s detailing seat
*Colours and designs may differ
Technical information
Width: 422 mm
Length: 642 mm
Height: 332 mm
Capacity: 130 kg
Weight: 55 kg
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
