Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
The LR45 low level lift has a lifting capacity of up to 4500kg.
It is designed to raise all four the wheels from the ground up to maximum height of 800 mm, with a mechanical locking system to prevent the vehicle from lowering prematurely.
It has a total width of 2100mm and is ideal to pick up wider vehicles like the Toyota Quantum’s.
Model: LR45
Product: 4.5 ton low level lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Technical information
Lifting capacity: 4500 kg
Max capacity – front axle: 2273 kg
Max capacity – rear axle: 2273 kg
Lifting height (no blocks): 578 mm
Lifting height (with blocks): 800 mm
Overall pad length: 1346 mm
Overall length: 2094 mm
Overall pad width: 610 mm
Overall width: 2159 mm
Lowered height: 102 mm
Lifting time: 1 35 seconds
Motor: 110/208-230 VAC / 50/60 Hz. 1Ph
The Zell AC900 is a semi-automatic aircon service station designed for efficient and reliable vehicle air conditioning maintenance.
Equipped with advanced features for refrigerant recovery, recycling, and recharging, it simplifies the servicing process while ensuring precision.
Its intuitive controls and robust design make it ideal for professional workshops, delivering consistent performance and meeting the demands of modern aircon systems.
Model: AC900
Product: Semi auto passenger air con service station
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information
Temperature: 5 – 50 °C
Max Pressure: 16 bar
Power: 220v / 50hz
HP/LG gauge: 80mm/class 1.0
Tank gauge: 40 mm
Screen: 5” color, Graphic
HP/LP gauge: 80mm
Tank gauge: 40mm
Vacuum pump: 60L/min, 1.8CFM
Ultimate vacuum: 75 Micron, 10Pa
Tank: 16L
Oil bottle: 250ml
Gas load cell: 1g 30kg
Compressor: 1/2HP, 14CC
Hose: 3m/SAE-J2196
Weight: 85kg
Dimensions: 550*600*1050 mm
The Easy lift is our portable car lift system.
Everything you need to quickly, easily and safely lift your vehicle or electric vehicle for inspection, service and detailing.
Ideal for the home or at the track – for ht weekend enthusiast or seasoned professional. Sets up in minutes, lifts to service height in seconds.
Space saving design – can be hung on a wall, stash out of the way.
The Easy Lift portable lifting system makes vehicle maintenance on and off the track convenient and lightening fast!
It can go anywhere and is easily stowed in the trunk or back seat of most cars. Bring it to the track, or drop it on your garage floor to perform routine maintenance in the comfort of your home all in seconds.
The Easy Lift replaces clumsy floor jacks and unstable jack stands with a safe, durable and convenient vehicle jacking and support system.
Simply position the lightweight jack frames under the vehicle, push the raise button on the hand-held control and in seconds the entire car is about 546mm of the ground ready for tyre changes, chassis tuning or other maintenance.
The ruggedly built frame collapse to a low 91mm profile, so they fit where other jacks don’t.
With Easy Lift, practicality and portability become a reality.
Because the Easy jack is void of any cross-members, it provides total under-car access and can be installed at a width that best suits the vehicle being raised.
Model: TL-5530
Product: 3ton Portable Lift
*Colours and designs may differ
Technical information
Lifting capacity: 3 ton
Individual frame weight: 44 kg
Raised (frame only): 462 mm
Raised (stacked blocks): 546 mm
Collapsed: 91 mm
Lifting point spread: – min 951 mm
Lifting point spread: – max 1676 mm
Frame width: 318 mm
Frame length: 1930mm
Lifting time: 15-30 seconds
Packaging weight 1/3: 51.3 kg
Packaging dimensions 2/3: 2030*395*137 mm
Packaging weight 2/3: 51.3 kg
Packaging dimensions 3/3: 695*335*300 mm
Packaging weight 3/3: 28kg
A Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top.
Code: SG40DX
Product: 4 Ton manual release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lift
Lifting capacity: 4000kg
Maximum lifting height: 1900mm
Minimum lifting height: 85mm
Overall height: 3605mm
Overall width: 3426mm
Width between columns: 2803mm
Maximum vehicle width: 2576mm
Lifting time: 40s
Lowering time: 60s
Noise level: 70 dB(A0/1m
Average weight of package: 620kg
Electric motor
Voltage: 220V
Power: 2.2 Kw
Speed: 2850rpm
Power unit
Type: Gear
Flow rate: 4.8 cm³/g
Continuous working pressure: 170 bar – 190 bar
Peak pressure: 210 bar
Weights & dimensions
Packaging dimensions 1/3: 2950*520*700 mm
Packaging weight 1/3: 600 kg
Packaging dimensions 2/3: 970*90*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 1780*480*420 mm
Packaging weight 3/3: 64 kg
This full automatic refill machine will allow you to check the air conditioning system in your vehicle in an easy way. There’s nothing easier than programming your A/C
settings and walking away to let the machine do its job.
The Zell AC1000-3G is here to match your needs and busy lifestyle.
Especially during the summer months, vehicles are going to need A/C service.
Older vehicles will need this performed more regularly, due to leaks and system inefficiencies.
That’s why you need a fast, reliable way to recharge those drained systems. While the machine works, your techs can perform other inspections and truly
provide the best possible customer care in your region.
Product: Fully auto passenger air con service station
*Colours and designs may differ
*Designed & Engineered in Italy Assembled in PRC
Technical information
Temperature: 5 – 50 °C
Max Pressure: 18 bar
Power: 220v / 50hz
HP/LG gauges: 80mm/class 1.0
Tank gauge: 40 mm
LCD back lit: 12*64 dot
HP/LP hoses: 250cm/SAEJS2196
Compressor: 3/8hp, 14cc
Fan/condenser: Yes
Filter drier: 80kg
Vacuum pump: 120L/min, 4.2 cfm
PAG bottle: 250ml
Electronica scale: 1g-30kg
Printer: Included
Weight: 95kg
Dimensions: 500*700*1070 mm
This full automatic refill machine will allow you to check the air conditioning system in your vehicle in an easy way.
There’s nothing easier than programming your A/C settings and walking away to let the machine do its job.
The Zell AC1000-3G is here to match your needs and busy lifestyle.
Especially during the summer months, vehicles are going to need A/C service.
Older vehicles will need this performed more regularly, due to leaks and system inefficiencies.
That’s why you need a fast, reliable way to recharge those drained systems.
While the machine works, your techs can perform other inspections and truly provide the best possible customer care in your region.
Model: AC1000 3G
Product: Fully auto passenger air con service station
*Colours and designs may differ
*Designed & Engineered in Italy
Technical information
Refrigerant: R134a
Temperature: 5 – 50 °C
Max Pressure: 18 bar
Power: 220v / 50hz
HP/LG gauges: 80mm/class 1.0
Tank gauge: 40 mm
LCD back lit: 12*64 dot
HP/LP hoses: 250cm/SAEJS2196
Compressor: 3/8hp, 14cc
Fan/condenser: Yes
Filter drier: 80kg
Vacuum pump: 120L/min, 4.2 cfm
PAG bottle: 250ml
Electronical scale: 1g-30kg
Printer: Included
Weight: 95kg
Dimensions: 500*700*1010 mm
The SG4 wheel alignment lift has built in rear slip plates, and comes with an 2.5 ton auxiliary jack and is suitable for long wheelbase Iveco’s.
It has all of the accessories required for the purpose of carrying out wheel alignment.
Code: SG4
Product: 5 ton Alignment lift with slip plates & 2.5 ton aux jack
Suitable for long base Iveco’s
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
You can carry out maintenance work on a 4 post lift, but for some jobs you will need the help of a jacking beam or as they are often referred to rolling jacks.
These are used when you need to lift the wheels off the platform.
They run up and down the center of the 2 platforms and you then position them where you need to lift, such as at the front or rear.
Model: SS700
Product: 4 ton service & parking lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lifting capacity: 4000kg
Max lifting height: 1900mm
Raising/lowering time: Appox 51s
Total height: 2237mm
Total width: 2630mm
Runway length: 4200mm
Max drive-through clearance: 2398mm
Runway width: 474mm
Power supply: 220V
Power: 2.2KW
Net weight: 850kg
Hydraulic pressure: 18MPa
Noise: <70dB(A)
Packaging dimensions: 4300*550*710 mm
Packaging weight: 850 kg
Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top. 3 stage telescopic lifting arms enabling you to lift anything from a small car, a transporter or a camper with a long wheelbase.
Code: SG-55
Product: 5.5 Ton electric release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Perfect for VW Crafters
Technical information
Lifting capacity: 5500 kg
Max lifting height: 1900mm
Min lifting height: 85mm
Power of motor: 3.0Kw
Oil pressure: 18Mpa
Power supply: 220V
Rise time: 50s
Lowering time: 40s
Packaging dimensions 1/3: 2950*570*930 mm
Packaging weight 1/3: 1059 kg
Packaging dimensions 2/3: 970*290*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 550*300*180 mm
Packaging weight 3/3: 7.5 kg
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a
separate isolator.
The ultimate solution for wheel repairs and balancing
IMRP– Rim Repair Machine with Swing Lathe
The IMRP is used to correct defected rims/mags.
It corrects and levels the rims and makes the surface smooth using the lathe.
The lathe unit is designed to clean crusty sections of the repaired rim surface.
XTB820 – Hand spun passenger wheel balancer
The XTB820 wheel balancer is the perfect companion to the XTC428B tyre changing machine. Small and compact, it is an electronic balancing machine with microprocessor designed for balancing wheels weighting up to 65kg.
The push button controlled calibration system allows a range of adjustment which is also sufficient to cover wheels. Differing from ordinary ones (motorcycles and racing cars).
Special functions are also available to cater for wheels of unusual shape and there is provision for optional functions of the balancing machine.
The operator will enter the 3 specifications of offset, wheel width and wheel diameter before spinning the wheel for the balancing process.
The balancer will then indicate the weight placement required and its value. Simple, compact, affordable and accurate the XTB820 is also ideal for use in a in a compact workshop environment as well as a mobile tyre fitting operation.
Robust design, making it a popular choice for automotive maintenance.
Used for lifting vehicles to facilitate maintenance or repair work.
Code: E1531C
Product: 3 Ton short body turbo lift
*Colours and designs may differ
Technical information
Min height: 120 mm
Max height: 453mm
Strokes: 6.5
Net weight: 28 kg
Gross weight: 30 kg
Product size: 685*338*155 mm
Packaging dimensions: 710*385*200 mm
Scissor stands are suitable for either on a motorcycle lift or on the floor.
Fitted with ball bearing rollers for smooth lifting and lowering. Raise by hand or with a sliding T-bar.
Comes with non-slip rubber for added security.
Great for providing easy access to motorcycles for repair & maintenance tasks, the foot pedal operated pneumatic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, it reduces the amount of strain involved with working on motorcycles, as it allows users to access the vital components of the bike without having to bend down or kneel.
Great for providing easy access to scooters for repair & maintenance tasks, the SD1010ND hand pump operated hydraulic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, the SD1010ND reduces the amount of strain involved with working on scooters, as it allows users to access the vital components of the bike without having to bend down or kneel.
Model: SD1010ND
Product: 250 kg scooter lift
*Colours and designs may differ
Technical information
Capacity: 250 kg
Lift weight: 80 kg
Minimum height: 170 mm
Maximum height: 760 mm
Length: 1800 mm
Width: 560 mm
Packaging dimensions: 1830*580*19 mm
Packaging weight: 180 kg
Setting up of the SD1010ND motorcycle/scooter lift
Winntec Combo
R4,945.00Winntec 3 ton low-profile turbo-lift trolley jack supplied together with a set of 3 ton ratchet trestle jack stands — everything a bay needs to lift a vehicle and hold it safely. Both items brand-new, price includes VAT.
Great for providing easy access to motorcycles for repair & maintenance tasks, the foot pedal operated pneumatic motorcycle lift is ideal for any professional or home workshop.
By raising your motorcycle to the ideal working height, it reduces the amount of strain involved with working on motorcycles, as it allows users to access the vital components of the bike without having to bend down or kneel.
Model: ZD04105AQ
Product: 450 kg motorcycle lift
*Colours and designs may differ
Technical information
Capacity: 450 kg
Min height: 190mm
Max height: 840mm
Air pressure: 110 – 120 PSI
Packaging dimensions: 2190*670*320 mm
Packaging weight: 183 kg
Scissor stands are suitable for either on a motorcycle lift or on the floor.
Fitted with ball bearing rollers for smooth lifting and lowering. Raise by hand or with a sliding T-bar.
Comes with non-slip rubber for added security.
Model: ZD04103A
Product: 450 kg motorcyle lift
*Colours and designs may differ
Technical information
Capacity: 450 kg
Min height: 85mm
Max height: 340mm
Table size: 380*230mm
Packaging dimensions: 440*250*9 mm
Packaging weight: 26 kg
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
