Need help? Call us: [ telephone number to be added ] or info@aetanda.co.za | 9 Impala Avenue, Kempton Park, 1619
Everything Your Bay Needs
Tyre changers, wheel balancers, vehicle lifts and jacks — held in stock in South Africa
Our newly upgraded floor jack unites an ultra-low-profile design, high reach, our unique 2-SPEED LOWERING technology, and a TURBO LIFTER pump system with major engineering and utility enhancements.
Featuring a fully covered oversized saddle pad, lower handle bumper, built-in magnetic tray, and an advanced fully welded power unit, the Plus Series ensures maximum workshop performance, zero leakage vulnerabilities, and an extended life cycle.
Model: Y420333
Product: 3 Ton low profile turbo lift trolley jack (plus series)
*Colours and designs may differ
Technical information
Min height: 76mm
Max height: 503mm
Width: 346mm
Length: 672mm
Weight: 31kg
Packaging dimensions: 805*400*195 mm
Packaging weight: 34 kg
High-quality pneumatic jack designed for lifting heavy loads, making it ideal for use in automotive workshops and industrial settings.
It is engineered with a focus on durability and performance.
Model: S60-2J
Product: 60/40 ton air-hydraulic trolley jack (2 stage)
*Colours and designs may differ
Technical information
Working air pressure: 0.9 – 1.2 Mpa
Min height: 220 mm
Max height: 580 mm
Lifting height:
– 60t: 121 mm
– 40t: 119 mm
Extension height: 75 mm + 45 mm
The S60-3J is a professional mobile hydraulic-pneumatic jack designed for lifting heavy vehicles, including trucks, agricultural, and construction equipment.
It boasts a robust lifting capacity of 60 tons, making it suitable for demanding tasks in various industries.
Model: S60-3J
Product: 60/40 ton air-hydraulic trolley jack (2 stage)
*Colours and designs may differ
Technical information
Working air pressure: 0.9 – 1.2 Mpa
-Min height 177 mm
-Max height 544 mm
Lifting height:
– 60t: 82 mm
– 40t: 81 mm
– 20t: 84 mm
Extension height: 75 mm + 45 mm
The Racing trolley jack has a unique 100% alloy floor jack that combines a futuristic design with our widely known and respected TURBO LIFTER (fast to the load, fast with the load) pumping technology.
Its solid rubber pad ensures optimal protection while lifting the vehicle.
Thick frame side plates and a multiple reinforced lift arm result in maximum strength and safety.
Model: Y411355
Product: 1.5 Ton Low profile, ultra light jack
*Colours and designs may differ
Technical information
Min height: 90mm
Max height: 360mm
Width: 236mm
Weight: 14kg
The SG4 wheel alignment lift has built in rear slip plates, and comes with an 2.5 ton auxiliary jack and is suitable for long wheelbase Iveco’s.
It has all of the accessories required for the purpose of carrying out wheel alignment.
Code: SG4
Product: 5 ton Alignment lift with slip plates & 2.5 ton aux jack
Suitable for long base Iveco’s
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
You can carry out maintenance work on a 4 post lift, but for some jobs you will need the help of a jacking beam or as they are often referred to rolling jacks.
These are used when you need to lift the wheels off the platform.
They run up and down the center of the 2 platforms and you then position them where you need to lift, such as at the front or rear.
Model: SS700
Product: 4 ton service & parking lift
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a separate isolator.
Technical information
Lifting capacity: 4000kg
Max lifting height: 1900mm
Raising/lowering time: Appox 51s
Total height: 2237mm
Total width: 2630mm
Runway length: 4200mm
Max drive-through clearance: 2398mm
Runway width: 474mm
Power supply: 220V
Power: 2.2KW
Net weight: 850kg
Hydraulic pressure: 18MPa
Noise: <70dB(A)
Packaging dimensions: 4300*550*710 mm
Packaging weight: 850 kg
The rolling jack is an air operated, scissors style rolling jack assembly capable of lifting the wheels free of the runways for brake, suspension and tyre service.
The rolling jack was designed to be used with a service or scissor alignment lift.
Raise 2 or 4 wheels off the vehicle lift runway to repair and do maintenance jobs like brake and suspension work.
The scissor-style rolling jack is designed to jack vehicles quickly and easily.
Exclusive telescoping rollers allows the runways to be adjusted for varying tread widths, so there is no need for adapters to work on a range of vehicles.
Model: AH-2140H
Product: 2.5 ton low profile pneumatic rolling jack
*Colours and designs may differ
Technical information
Lifting capacity: 2500 kg
Min lifting height: 180mm
Max lifting height: 460 mm
Clear Floor lift version has no obstruction between the 2 posts.
They are considered ideal for when transmission jacks are constantly in use or cars with a low ride height.
The steel ropes and hydraulic pipes go over the top. 3 stage telescopic lifting arms enabling you to lift anything from a small car, a transporter or a camper with a long wheelbase.
Code: SG-55
Product: 5.5 Ton electric release – Clear floor
Certification: ISO 9000/9001 CE
*Colours and designs may differ
Perfect for VW Crafters
Technical information
Lifting capacity: 5500 kg
Max lifting height: 1900mm
Min lifting height: 85mm
Power of motor: 3.0Kw
Oil pressure: 18Mpa
Power supply: 220V
Rise time: 50s
Lowering time: 40s
Packaging dimensions 1/3: 2950*570*930 mm
Packaging weight 1/3: 1059 kg
Packaging dimensions 2/3: 970*290*350 mm
Packaging weight 2/3: 25 kg
Packaging dimensions 3/3: 550*300*180 mm
Packaging weight 3/3: 7.5 kg
Important notice!
• Lift must be installed indoors.
• Approved installers must be used when installing lifts or warranty will be void.
• All electrical connections must be done by a qualified Electrician, and each unit requires a
separate isolator.
Robust design, making it a popular choice for automotive maintenance.
Used for lifting vehicles to facilitate maintenance or repair work.
Code: E1531C
Product: 3 Ton short body turbo lift
*Colours and designs may differ
Technical information
Min height: 120 mm
Max height: 453mm
Strokes: 6.5
Net weight: 28 kg
Gross weight: 30 kg
Product size: 685*338*155 mm
Packaging dimensions: 710*385*200 mm
The Winntec 5T Toe Jack allows lifting of heavy machinery with minimum ground clearance.
There are lifting points on both the toe and the jack’s top. Equipped with chromed rams and pistons.
Model: Y418005
Product: 5 Ton toe jack
*Colours and designs may differ
Technical information
Minimum lifting height: 368mm
Maximum lifting height: 573mm
Weight: 26kg
Width: 320mm
Depth: 140mm
The Winntec Air Hydraulic Pump is for use with a variety of rams, presses, and hydraulic tools operating up to 700 bar.
It features a muffler for quiet operation and two-stage release mechanism.
Winntec are an established and respected manufacturer, developer and supplier of quality, efficient and extremely reliable garage equipment – suitable for a vast range of applications.
Model: Y451150
Product: Aluminum hydraulic foot pump
*Colours and designs may differ
Technical information
Working pressure: 6.0-10.0 bar
Net weight: 7.9kg
Packaged dimensions: 200*170*310mm
Additional: Two stage release mechanism, internal relief valve
Capacity: 10 000 psi (700 bar)
Tank construction: Aluminum
Effective oil capacity: 1600cc
Air inlet: ¼”
Air outlet: 3/8”
The Winntec Long Chassis Jacks are constructed for heavy-duty lifting.
An automatic overload safety valve, efficient foot-operated pump and swivel castors come as standard.
Winntec are an established and respected manufacturer, developer and supplier of quality, efficient and extremely reliable garage equipment – suitable for a vast range of applications.
Model: Y1020
Product: 20 Ton long reach trolley jack
Important notice!
• Trolley jacks are not a long-term support to lift vehicles.
• Jack stands/trestles to be used with trolley jacks as they are designed to hold weight of the vehicle for extended periods – as per SANS71 & Driven Machinery ACT.
• The load must be supported by a load bearing structure.
Technical information
Lifting height: 435mm
Max height: 620mm
Min height: 185mm
Gross weight: 271kg
Net weight: 241kg
Packaging size: 175*565*431mm
The Winntec 20T Trolley Air Bottle Jack features chrome pistons, heat-treated cylinder wall, and aluminum air motor for durability, safety, and performance.
Air filters prevent contamination.
Winntec are an established and respected manufacturer, developer and supplier of quality, efficient and extremely reliable garage equipment – suitable for a vast range of applications.
Model: Y432020
Product: 20 Ton air-hydraulic bottle jack
Technical information
Min height: 245mm
Max height: 475mm
Hydraulic stroke: 145mm
Ext screw: 80mm
Length: 220mm
Width: 175mm
Weight: 16.5kg
Heavy duty, high reach welded jack stand with detachable handle, multiangle
handle socket and wheels for easy positioning under the vehicle.
The pin type support column adjusts to various height positions up to 971mm making it suitable for both tyre service and general trailer service jobs where chassis support is needed.
Model: Y451206
Product: 12T pin type high reach trestle
Technical information
Type: Pin type
Lifting capacity: 12 ton
Min lifting height: 601 mm
Max lifting height: 971 mm
Base size: 341 mm
The Winntec Jack Stands are packed in pairs and intended to be used that way.
Strong ratchet type adjustment allows for reliable lifting, versatile flexibility and further support.
Winntec are an established and respected manufacturer, developer and supplier of quality, efficient and extremely reliable garage equipment – suitable for a vast range of applications.
Model: Y451600
Product: 6T ratchet trestle (per)
Technical information
Min height: 395mm
Max height: 625mm
Width: 263mm
Length: 293mm
Weight: 13.8kg
This hydraulic hand pumps is some of the most durable, powerful and reliable hand pumps in the industry today.
It has a feature valve blocks that is machined from a single piece of high strength aircraft grade aluminum and high capacity reservoirs made from alloy steel that maximizes durability.
The hand pumps are compact and easy to carry around the job.
To get the job done faster, these powerful dual speed pumps offer some of the best flow rates in the industry.
The hydraulic hand pumps feature an internal safety valve to prevent system damage.
Model: Y-EPA10921
Product: Industrial hand pump
Technical information
Cylinder type: Single acting
Speed: Two
Usable oil volume: 750 CM3
Pressure rating – 1st stage: 25 BAR
Pressure rating – 2nd stage: 700 BAR
Oil displacement – 1st stage: 33.0 CM3
Oil displacement – 2nd stage: 3.3 CM3
Handle force: 49kg
Port thread: 3/8-18NPT inch
Automotive Equipment, Tools & Accessories
Enterprise number K2024519484
VAT registration number 9003172336
Need Help?
Saturday & Sunday: Closed
Customer Service
- All prices include VAT at 15%
- Free delivery on orders over R10,000
Copyright © 2026 AETANDA. All rights reserved.
